M. B. Metal India
M B Metal India, Mumbai, Maharashtra
GST No. 27AJTPJ1123B1ZK
08048019805 87% Response Rate
Send E-mail
- Home
- »
- Our Products
- »
- Stainless Steel Product
| Size | 1/2 inch |
| Tensile Strength | 75 Ksi |
| Elongation | 40% |
| Packaging Type | Box |
| Material | Stainless Steel |
| Material Grade | SS304 |
Specifications:
Standards:
Chemical Properties:
Grade | C | Mn | Si | P | S | Cr | Ni | N |
304 | 0.07max | 2.0max | 0.75max | 0.045max | 0.03max | min: 18.0 max: 20.0 | min: 8.0 max: 10.5 | — |
Mechanical Properties:
Grade | Tensile Strength ksi (min) | Yield Strength 0.2% ksi (min) | Elongation % | Hardness (Brinell) MAX | Hardness (Rockwell B) MAX |
304 | 75 | 30 | 40 | 201 | 92 |
Physical Properties:
Density | Thermal Conductivity | Electrical | Modulus of | Coefficient of | Specific Heat | Melting |
at 68°F: 0.285 | 9.4 at 212°F | 28.3 at 68°F | 28 | 9.4 at 32 – 212°F | 0.1200 at 68°F to 212°F | 2500 to 2590 |
12.4 at 932 °F | 39.4 at 752°F | 10.2 at 32 – 1000°F | ||||
49.6 at 1652 °F | 10.4 at 32 – 1500°F |
| Minimum Order Quantity | 5 Kg |
| Shape | Round |
| Material Grade | 304 Circle |
| Material | Stainless Steel |
| Thickness | 1-100 mm |
| Diameter | Up to 2000 mm |
| Tensile Strength | 75 Ksi |
| Elongation | 40% |
Specifications:
Standards:
Chemical Properties:
Grade | C | Mn | Si | P | S | Cr | Ni | N |
304 | 0.07max | 2.0max | 0.75max | 0.045max | 0.03max | min: 18.0 max: 20.0 | min: 8.0 max: 10.5 | — |
Mechanical Properties:
Grade | Tensile Strength ksi (min) | Yield Strength 0.2% ksi (min) | Elongation % | Hardness (Brinell) MAX | Hardness (Rockwell B) MAX |
304 | 75 | 30 | 40 | 201 | 92 |
Physical Properties:
Density | Thermal Conductivity | Electrical | Modulus of | Coefficient of | Specific Heat | Melting |
at 68°F: 0.285 | 9.4 at 212°F | 28.3 at 68°F | 28 | 9.4 at 32 – 212°F | 0.1200 at 68°F to 212°F | 2500 to 2590 |
12.4 at 932 °F | 39.4 at 752°F | 10.2 at 32 – 1000°F | ||||
49.6 at 1652 °F | 10.4 at 32 – 1500°F |
| Minimum Order Quantity | 5 Kilogram |
| Application | Industrial |
| Thickness | 0.4mm to 8mm |
| Size | 0.5 - 20mm |
| Brand | JIndal |
| Grade | 300 series |
| Material | Stainless Steel |
| Finish | Polished |
| Features | Corrosion Resistant |
| Usage/Application | Food Processing |
| Shape | Coil |
| Material Grade | SS304 |
Stainless steel stains less easily than other iron-based metals, but it’s not literally “stainless”. Just like standard steel, stainless can get marked up by fingerprints and grease, develop discoloration, and eventually rust. The difference is resilience. Stainless steel can withstand much more time and abuse before showing signs of wear.
All steels have the same basic iron and carbon composition, but stainless steel also contains a healthy dose of chromium—the alloy that gives stainless steel its famous corrosion resistance.
Stainless steel must contain at least 10.5 percent chromium. Depending on the grade, it may contain much higher chromium levels, and additional alloying ingredients like molybdenum, nickel, titanium, aluminum, copper, nitrogen, phosphorous and selenium.
The two most common stainless steel grades are 304 and 316. The key difference is the addition of molybdenum, an alloy which drastically enhances corrosion resistance, especially for more saline or chloride-exposed environments. 316 stainless steel contains molybdenum, but 304 doesn’t.
For outdoor furnishings like rails and bollards, stainless steel is an ideal corrosion-resistant material, but it will only withstand long-term exposure if the grade is appropriate for its environment. 304 is an economical and practical choice for most environments, but it doesn’t have the chloride resistance of 316. The slightly higher price point of 316 is well worth it in areas with high chloride exposure, especially the coast and heavily salted roadways. Each application for stainless steel has its own unique demands, and needs a stainless steel that’s up to the task.
304 stainless steel is the most common form of stainless steel used around the world, largely due to its excellent corrosion resistance and value. It contains between 16 and 24 percent chromium and up to 35 percent nickel, as well as small amounts of carbon and manganese.
The most common form of 304 stainless steel is 18-8, or 18/8, stainless steel, which contains 18 percent chromium and 8 percent nickel.
304 can withstand corrosion from most oxidizing acids. That durability makes 304 easy to sanitize, and therefore ideal for kitchen and food applications. It is also common in buildings, décor, and site furnishings.
304 stainless steel does have one weakness: it is susceptible to corrosion from chloride solutions, or from saline environments like the coast. Chloride ions can create localized areas of corrosion, called "pitting," which can spread beneath protective chromium barriers to compromise internal structures. Solutions with as little as 25 ppm of sodium chloride can begin to have a corrosive effect.
*Your information is safe with us.
| Minimum Order Quantity | 5 Kilogram |
| Application | Industry |
| Material Grade | SS310 |
| Single Piece Length | 6 meter, 3 meter |
| Thickness/Diameter | 1-2 inch |
| Surface Finishing | 2B |
| Finishing | 2B |
| Material | Stainless Steel |
| Form | Plates, Sheets, Round Bars, Circle, Flat, Square Bar |
| Condition | New |
| Grade | 310 |
Standards:
Chemical Properties:
% | Cr | Ni | C | Si | Mn | P | S | Mo | Cu | Fe |
310 | min: 24.0 | min: 19.0 | 0.25 | 0.75 | 2.0 | 0.045 | 0.030 | 0.75 | 0.5 | balance |
310S | min: 24.0 | min: 19.0 | 0.08 | 1.00 | 2.0 | 0.045 | 0.030 | 0.75 | 0.5 | balance |
Mechanical Properties:
Grade | Tensile Strength | Yield Strength 0.2% | Elongation - | Hardness | Hardness |
310/310S | 75 | 30 | 40 | 217 | 95 |
Physical Properties:
Denstiy | Coefficient of | Electrical Resistivity mW-in | Thermal Conductivity BTU/hr-ft-°F | Specific Heat BTU/lbm -°F | Magnetic Permability (annealed)1 | Modules of Elasticity (annealed)2-psi | |||||
at 68 °F | at 68 – 212°F | at 68 – 932°F | at 68 – 1832°F | at 68°F | at 1200°F | at 68 – 1832°F | at 68 – 932°F | at 32 – 212°F | at 200H | in tension (E) | in shear (G) |
0.29 | 8.8 | 9.5 | 10.5 | 30.7 | — | 10.5 | 10.8 | 0.12 | 1.02 | 29 x 106 | 11.2 x 106 |
| Size | All |
| Steel Grade | SS 304 |
| Material Grade | 304 L / 316 L |
| Brand | JIndal |
| Shape | Rectangular |
| Material | Stainless Steel |
| Usage/Application | Industrial |
| Thickness | 2-3 mm, 1-2 mm, 0-1 mm, 3-4 mm |
| Standard | ASTM |
| Minimum Order Quantity | 5 Kg |
| Shape | Round |
| Usage/Application | Industrial |
| Single Piece Length | 3 meter |
| Finish | Polished |
| Thickness/Diameter | >4 inch |
| Material | Stainless Steel |
SS Round Bar Grades:
Applications:
*Your information is safe with us.
| Minimum Order Quantity | 5 Kilogram |
| Grade | 300 series |
| Thickness | 0.02-20 mm |
| Usage/Application | Industry |
| Material | Stainless Steel |
| Length | As Per Requirement |
| Finish | Polished |
| Width | 3-2000 mm |
| Diameter | 3 inch |
| Elongation | 40% |
| Technique | Hot and Cold Rolled |
Grade:
Model Number: 202, 201, J4, 304, 304L, 316, 316L, 310S, 309S, 321, 410, 410S, 409L, 430
| Minimum Order Quantity | 5 Kg |
| Unit Pipe Length | Customized, 6 meter, 3 meter |
| Size | 2 inch, 3 inch, 1 inch, 1/2 inch, 3/4 inch |
| Material Grade | 304/316 |
| Country of Origin | Made in India |
| Shape | Round |
| Material | Stainless Steel |
| Shape | C Channel |
| Material Grade | SS316 |
| Application | Other |
| Material | Stainless Steel304/316 |
| Fireproof | Yes |
| Corrosion Proof | Yes |
Specification:
Forms:
Sizes of Stainless Steel Channel | Most carbon profiles are available |
Length | 20′ to 22′ Random length |
300 Series Stainless Steel Grades | 304 – 304/L – 316L |
Formed Channel from Plate Grades | 304H – 309/S – 310/S – 321/H – 347/H – Duplex 2205 – and other grades |
*Your information is safe with us.
| Minimum Order Quantity | 50 Kilogram |
| Grade | SS304, TP409, TP304, SS316 |
| Unit Pipe Length | 6 meter, 3 meter |
| Size | 1''-2'', 10''-20'', 1/4''-1'', 2''-3'', 3''-10'' |
| Length | 0-2 meters, 4-6 meters, 2-4 meters |
| Type | Coils, Seamless, Welded |
| Condition | New |
| Brand | Jindal |
| Steel Grade | 304, 316, 310 |
| Material Grade | 304, 316, 310 |
| Material | Stainless Steel |
| Hollow Sections | Elliptical, Circular, Square, Rectangular |
Stainless steel stains less easily than other iron-based metals, but it’s not literally “stainless”. Just like standard steel, stainless can get marked up by fingerprints and grease, develop discoloration, and eventually rust. The difference is resilience. Stainless steel can withstand much more time and abuse before showing signs of wear.
All steels have the same basic iron and carbon composition, but stainless steel also contains a healthy dose of chromium—the alloy that gives stainless steel its famous corrosion resistance.
Stainless steel must contain at least 10.5 percent chromium. Depending on the grade, it may contain much higher chromium levels, and additional alloying ingredients like molybdenum, nickel, titanium, aluminum, copper, nitrogen, phosphorous and selenium.
The two most common stainless steel grades are 304 and 316. The key difference is the addition of molybdenum, an alloy which drastically enhances corrosion resistance, especially for more saline or chloride-exposed environments. 316 stainless steel contains molybdenum, but 304 doesn’t.
For outdoor furnishings like rails and bollards, stainless steel is an ideal corrosion-resistant material, but it will only withstand long-term exposure if the grade is appropriate for its environment. 304 is an economical and practical choice for most environments, but it doesn’t have the chloride resistance of 316. The slightly higher price point of 316 is well worth it in areas with high chloride exposure, especially the coast and heavily salted roadways. Each application for stainless steel has its own unique demands, and needs a stainless steel that’s up to the task.
304 stainless steel is the most common form of stainless steel used around the world, largely due to its excellent corrosion resistance and value. It contains between 16 and 24 percent chromium and up to 35 percent nickel, as well as small amounts of carbon and manganese.
The most common form of 304 stainless steel is 18-8, or 18/8, stainless steel, which contains 18 percent chromium and 8 percent nickel.
304 can withstand corrosion from most oxidizing acids. That durability makes 304 easy to sanitize, and therefore ideal for kitchen and food applications. It is also common in buildings, décor, and site furnishings.
304 stainless steel does have one weakness: it is susceptible to corrosion from chloride solutions, or from saline environments like the coast. Chloride ions can create localized areas of corrosion, called "pitting," which can spread beneath protective chromium barriers to compromise internal structures. Solutions with as little as 25 ppm of sodium chloride can begin to have a corrosive effect.
| Shape | Round |
| Usage/Application | Industrial |
| Size | 10-20 mm |
| Material | Stainless Steel |
| Thickness/Diameter | >4 inch, 0-1 inch, 1-2 inch, 2-3 inch, 3-4 inch |
| Single Piece Length | 6 meter, 3 meter |
| Length | 1-6 meter |
Grades: Stainless Steel 201, 202, 304, 304L, 309, 310, 310S, 316, 316L, 321, 17-4PH 400 Series.
Tolerance: h7, h8, h9, k12, k13.
Finish:
| Shape | Round |
| Material Grade | 316/316 L |
| Size | All Size available |
| Thickness | All Size available |
| Brand | MBM |
| Usage/Application | Industrial |
| Country of Origin | Made in India |
*Your information is safe with us.
| Minimum Order Quantity | 5 Kilogram |
| Material Grade | SS304 |
| Size | All |
| Thickness | 1-2 mm |
| Shape | Round |
| Diameter | 3 inch |
| Country of Origin | Made in India |
| Material | Stainless Steel |
| S.S. | 200 | 202 | 301 | 302 | 302B | 303 | 303Se | 304 | 304L | 305 | 308 | 309 | 309s | 310 | 310s | 314 | 316 | 316L | 317 | 321 | 347 |
| Carbon | 0.12 | 0.12 | 0.15 | 0.15 | 0.15 | 0.15 | 0.15 | 0.08 | 0.03 | 0.12 | 0.08 | 0.2 | 0.08 | 0.25 | 0.08 | 0.25 | 0.08 | 0.03 | 0.08 | 0.08 | 0.08 |
| Manganese | 7.5/10 | 5.5/7.5 | 2 | 2 | 2 | 2 | 2.002.00 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Silicone | 0.9 | 0.9 | 1 | 1 | 2.0/3.0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1.5 | 1.5 | 1.5/3.0 | 1 | 1 | 1 | 1 | 1 |
| Chromium | 14/16 | 16/18 | 16/18 | 17/19 | 17/19 | 17/19 | 17/19 | 18/20 | 18-Feb | 17/19 | 19/21 | 22/24 | 22/24 | 24/26 | 24/26 | 24/26 | 23/26 | 16/18 | 18/20 | 17/19 | 17/19 |
| Nickel | 0.5/2.0 | 0.5/4.0 | 6.0/8.0 | 8.0/10 | 8.0/10 | 8.0/10 | 8.0/10 | 8.0/12 | 8.0/12 | Oct-13 | 10-Dec | Dec-15 | Dec-15 | 19/22 | 19/22 | 19/22 | Oct-14 | Oct-14 | Nov-15 | 9.0/12 | Sep-13 |
| Molybdenum | 0.2 | 0.2 | 2.0/3.0 | 2.0/3.0 | 3.0/4.0 | ||||||||||||||||
| Phosphorus | 0.06 | 0.06 | 0.045 | 0.045 | 0.045 | 0.2 | 0.2 | 0.045 | 0.045 | 0.045 | 0.045 | 0.045 | 0.045 | 0.045 | 0.045 | 0.045 | 0.045 | 0.045 | 0.045 | 0.045 | 0.045 |
| Nitrogen | 0.25 | 0.25 | |||||||||||||||||||
| Suiphur | 0.03 | 0.03 | 0.03 | 0.15MIN | - | 0.03 | 0.03 | 0.03 | 0.03 | 0.03 | 0.03 | 0.03 | 0.03 | 0.03 | 0.03 | 0.03 | 0.03 | 0.03 | 0.03 |
| Material Grade | 304,310,316,316L,310S,202,204 |
| Usage/Application | Industrial |
| Shape | Round |
| Brand | Metal |
| Single Piece Length | 3 meter |
| Size | As per Client requirement |
| Technique | Cold Rolled |
| Surface Finish | As per Client requirement |
tma 316ti stainless is a titanium-stabilized version of type 316 molybdenum-bearing austenitic stainless steel. It is also known as din/en designation no. 1. 4571. The type 316 alloys offer excellent resistance to general corrosion and pitting/crevice corrosion, which is better than the conventional chromium-nickel austenitic stainless steels such as type 304. They also offer higher creep, stress-rupture and tensile strength at elevated temperature. Type 316 stainless steel can be susceptible to sensitization - the formation of grain boundary chromium carbides at temperatures between approximately 900 and 1500 f (425 to 815 c) - which can result in rapid corrosion. Reduced carbon type 316l is resistant to sensitization; however, extended exposures in this temperature range will eventually result in sensitization of even the low carbon grade. Resistance to sensitization is achieved in type 316ti with titanium additions to stabilize the structure against chromium carbide precipitation, which is the source of sensitization. This stabilization is achieved by an intermediate-temperature heat treatment, during which the titanium reacts with carbon to form titanium carbides. This significantly reduces susceptibility to sensitization in service by limiting the formation of chromium carbides. Thus, the alloy can be used for extended periods at elevated temperatures without compromising its corrosion resistance.
|
temper |
annealed |
|
|
tensile rm |
75 |
ksi (min) |
|
tensile rm |
515 |
mpa (min) |
|
r. P. 0. 2% yield |
30 |
ksi (min) |
|
r. P. 0. 2% yield |
205 |
mpa (min) |
|
elongation (2 or 4d gl) |
35 |
% (min) |
chemical composition (% by weight)
|
element |
min |
max |
|
c |
- |
0. 08 |
|
si |
- |
0. 75 |
|
mn |
- |
2 |
|
p |
- |
0. 45 |
|
s |
- |
0. 03 |
|
cr |
16 |
18 |
|
mo |
2 |
3 |
|
n |
- |
0. 1 |
|
fe |
balance |
|
|
ni |
10 |
14 |
|
ti |
5x%(c+n) |
|
| Material Grade | Nimonic Steel |
| Material | Alloy |
| Shape | Square, Rectangular |
| Brand | MBM |
| Size | All |
| Usage/Application | Industrial |
| Country of Origin | Made in India |
Available in the following form including Nimonic 263 Sheet, Nimonic 263 Coil, Nimonic 263 Clad Plate, Nimonic 263 Flat Sheet and Nimonic 263 Rolling Plate. NIMONIC alloy 263 (UNS N07263, 2.4650) is precipitation-hardenable nickel-chromium-cobalt alloy with an addition of molybdenum for solid-solution strengthening. The alloy is good oprion for sheet applications. These alloys are characterised by their high-temperature low-creep and high performance. Nimonic 263 has high strength and corrosion resistance along with good formability and high-temperature ductility in welded structures. These high temp Nimonic 263 Plates are suitable for gas turbines for rings, casings, and various sheet fabrications and can be used up to about 1650°F (900°C). Alloy C263 plate – Nimonic 263 plate exhibits excellent intermediate temperature tensile ductility, and is not normally subject to strain age cracking problems common for other gamma prime strengthened alloys. Alloy 263 Plate combines properties & special features make it best choice for a variety of fabricated components in both aircraft turbine engine and landbased turbine applications. Nimonic® C-263 Plate is also known as Nicrofer 5120 CoTi Plate, Haynes 263 Plate, and Hastelloy C-263 Plate.
Nimonic 263 Plates Chemical Composition :
|
Grade |
Ni |
Co |
Cr |
Mo |
Ti |
Fe |
Mn |
Al |
Si |
Cu |
C |
B |
S |
|
Nimonic 263 |
49 |
19-21 |
19-21 |
5.60-6.10 |
1.90-2.40 |
*Your information is safe with us.
| Minimum Order Quantity | 50 Kg |
| Shape | Hexagonal |
| Usage/Application | Industrial |
| Size | 10mm to 100 |
| Brand | MBM |
| Material | Stainless Steel |
| Unit Length | 3 m |
| Country of Origin | Made in India |
Stainless Steel 304 Bar, SS 304Round Rods, ASTM B276 Stainless Steel 304 Round Bars UNS S30400 S30403 Bright Bar Stainless Steel 304 Hex Bar Stainless Steel 304 Forged Bars, DIN 1.4301 1.4306 Bright Bars Exporter in India
Stainless Steel 304 Bar, SS 304 Round Rods, ASTM B276 Stainless Steel 304 Round Bars, UNS S30400 / S30403 Bright Bar, Stainless Steel 304 Hex Bar, Stainless Steel 304 Forged Bars, DIN 1.4301 / 1.4306 Bright Bars Exporter in India
We are Manufacturer, Supplier & Exporter of Stainless Steel 304 304L Round Bars (SS 304 304L Round Bars) as a manufacturer, exporter, stockiest and supplier to our domestic and global clients. Stainless Steel 304L Bars (SS 304 Bars) is austenitic steel by means of having nonmagnetic features in the annealed form that offers excellent corrosion resistance to both atmospheric and chemical exposures, in the company of an elevated resistance to oxidation. Stainless Steel 304L Round Bars and Rods has a significant measure of the similar mechanical characteristics of SS 304, however this particular audit is extra lowcarbon dissimilarity. It is also known as S30403, these Stainless Steel 304L Round Bars has most outrageous measure of carbon substance that disposes of the carbide precipitation that comes in the midst of the welding system. For the reason of these qualities, these Stainless Steel 304L Rods can be used as a piece of welded state, even in enormously ruinous structures. These 304 Stainless Steel bars are used for several applications such as in architectural mouldings and trim, welded parts of chemical, textile, paper, pharmaceutical and chemical industry processing equipment.
Stainless Steel 304 / 304L Round Bar Rod Equivalent Grades
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
SS 304 | 1.4301 | S30400 | SUS 304 | 304S31 | 08 |
| Minimum Order Quantity | 5 Kg |
| Material Grade | SS304 |
| Shape | Rectangular |
| Application | Industrial |
| Material | Stainless Steel |
| Form | Plates, Sheets, Round Bars, Circle, Flat, Square Bar |
Specifications:
Chemical Properties:
Grade | C | Mn | Si | P | S | Cr | Ni | N |
304 | 0.07max | 2.0max | 0.75max | 0.045max | 0.03max | min: 18.0 max: 20.0 | min: 8.0 max: 10.5 | — |
Mechanical Properties:
Grade | Tensile Strength ksi (min) | Yield Strength 0.2% ksi (min) | Elongation % | Hardness (Brinell) MAX | Hardness (Rockwell B) MAX |
304 | 75 | 30 | 40 | 201 | 92 |
Physical Properties:
Density | Thermal Conductivity | Electrical | Modulus of | Coefficient of | Specific Heat | Melting |
at 68°F: 0.285 | 9.4 at 212°F | 28.3 at 68°F | 28 | 9.4 at 32 – 212°F | 0.1200 at 68°F to 212°F | 2500 to 2590 |
12.4 at 932 °F | 39.4 at 752°F | 10.2 at 32 – 1000°F | ||||
49.6 at 1652 °F | 10.4 at 32 – 1500°F |
| Material Grade | SS 316L |
| Unit Pipe Length | 18 meter |
| Outer Diameter | 3 inch |
| Section Shape | Round |
| Material | Stainless Steel |
Specifications:
Standards:
Chemical Properties:
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
316L | 0.03 | 2.0 | 0.75 | 0.045 | 0.03 | min: 16.0 | min: 2.0 | min: 10.0 | 0.10 |
Mechanical Properties:
Grade | Tensile Strength | Yield Strength | Elongation % | Hardness (Brinell) MAX | Hardness |
316L | 70 | 25 | 40 | 217 | 95 |
Physical Properties:
Density | Thermal Conductivity | Electrical | Modulus of | Coefficient of | Specific Heat | Melting |
0.29 at 68°F | 100.8 at 68 212°F | 29.1 at 68°F | 29 | 8.9 at 32 – 212°F | 0.108 at 68°F | 2500 to 2550 |
9.7 at 32 – 1000°F | 0.116 at 200°F | |||||
11.1 at 32 – 1500°F |
*Your information is safe with us.
| Steel Grade | SS304 |
| Unit Pipe Length | 3 meter, 6 meter |
| Usage/Application | Industrial |
| Material | Stainless Steel |
| Surface | Finished Polished |
| Surface Finish | Finished Polished |
| Material | Stainless Steel |
| Application | Construction |
| Design | Standard |
| Form | Stainless Steel Cold Drawn Angles, Stainless Steel Equal Angles |
Specifications:
Chemical properties:
Carbon, Max % | 0.03 |
Manganese, Max % | 2.00 |
Phosphorus, Max % | 0.045 |
Sulphur, Max % | 0.03 |
Chromium, Max% | 17.5 |
Nickel, Min% | 8.0 |
Molybdenum, Max% | N/A |
Mechanical properties:
Tensile Strength ksi | 81 |
Yield 2% Offset ksi | 37 |
Elongation in 2” (50.80mm) | 55 |
| Shape | Square |
| Usage/Application | Industrial |
| Size | 10-20 mm |
| Brand | MBM |
| Type | 304 |
| Material | Stainless Steel |
| Unit Length | 3 m |
| Country of Origin | Made in India |
*Your information is safe with us.
| Grade | ASTM A240 |
| Shape | Rectangular |
| Material | Stainless Steel |
| Thickness | 2-3 mm, 3-4 mm |
| Thickness | 3-4 mm, 2-3 mm, 0-1 mm, >5mm, 1-2 mm, 4-5 mm |
| Material | Stainless Steel |
| Surface Treatment | Polished |
| Shape | Rectangular |
Stainless Steel Sheets Grades:
Application:
| Material | SS |
| Shape | Round |
| Usage/Application | Industrial |
| Single Piece Length | 6 meter, 3 meter |
Specifications of 17.4 PH Rods:
Chemical Composition:
Applications:
*Your information is safe with us.
| Minimum Order Quantity | 5 Kilogram |
| Size | 2 inch, 1/2 inch, 1 inch, 3 inch, 3/4 inch |
| Features | Pickled, Anealed |
| Unit Pipe Length | Customized, 3 meter, 6 meter |
| Form | Plates, Sheets, Round Bars, Circle, Flat, Square Bar |
| Material | Stainless Steel |
| Material Grade | SS 304L |
Specifications:
Standards:
Chemical Properties:
Grade | C | Mn | Si | P | S | Cr | Ni | N |
304L | 0.03max | 2.0max | 0.75max | 0.045max | 0.03max | min: 18.0 max: 20.0 | min: 8.0 max: 12.0 | 0.10 max |
Mechanical Properties:
Grade | Tensile Strength ksi (min) | Yield Strength 0.2% ksi (min) | Elongation % | Hardness (Brinell) MAX | Hardness (Rockwell B) MAX |
304L | 70 | 25 | 40 | 201 | 92 |
Physical Properties:
Density | Thermal Conductivity | Electrical | Modulus of | Coefficient of | Specific Heat | Melting |
at 68°F: 0.285 | 9.4 at 212°F | 28.3 at 68°F | 28 | 9.4 at 32 – 212°F | 0.1200 at 68°F to 212°F | 2500 to 2590 |
12.4 at 932 °F | 39.4 at 752°F | 10.2 at 32 – 1000°F | ||||
49.6 at 1652 °F | 10.4 at 32 – 1500°F |
| Diameter | 15 cm |
| Product Type | Circles |
| Material Grade | SS304 |
| Packaging Type | Box |
| Thickness | 1-100 mm |
| Material | Stainless Steel |
Specifications:
Chemical Properties:
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
316 | 0.08 | 2.0 | 0.75 | 0.045 | 0.03 | min: 16.0 | min: 2.0 | min: 10.0 | 0.10 |
Mechanical Properties:
Grade | Tensile Strength | Yield Strength | Elongation % | Hardness (Brinell) MAX | Hardness |
316 | 75 | 30 | 40 | 217 | 95 |
Physical Properties:
Density | Thermal Conductivity | Electrical | Modulus of | Coefficient of | Specific Heat | Melting |
0.29 at 68°F | 100.8 at 68 212°F | 29.1 at 68°F | 29 | 8.9 at 32 – 212°F | 0.108 at 68°F | 2500 to 2550 |
9.7 at 32 – 1000°F | 0.116 at 200°F | |||||
11.1 at 32 – 1500°F |
| Thickness/Diameter | >4 inch, 1-2 inch, 0-1 inch, 2-3 inch, 3-4 inch |
| Steel Grade | SS 904L |
| Single Piece Length | 3 meter, 6 meter |
| Surface Finishing | Polished |
| Material | Stainless Steel |
| Shape | Round |
Specifications | : | ASTM A/ASME SA213/A249/A269/A312/A358 CL. I to V ASTM A789/A790 |
Dimensions | : | ASTM, ASME and API |
Standards | : | GB/T 14975-2002, GB/T 14976-2002, GB 13296-91, API, ASTM A213, ASTM A312, ASTM A269, JIS G3459, JIS G3463, JIS G3448, DIN17458 |
Type | : | Seamless / ERW / Welded / Fabricated / LSAW Pipes |
Form | : | Round, Square, Rectangular, Hydraulic Etc |
Length | : | Single Random, Double Random Cut Length. |
| ||
STANDARD | WERKSTOFF NR. | UNS | JIS | AFNOR | BS | KS | EN |
SS 904L | 1.4539 | N08904 | SUS 890L | Z2 NCDU 25-20 | 904S13 | STS 317J5L | X1NiCrMoCu25-20-5 |
Chemical Composition :
Grade | C | Mn | Si | P | S | Cr | MO | Ni | CU | |
904L | Min | - | - | - | - | - | 19.0 | 4.00 | 23.00 | 1.00 |
max | 0.20 | 2.00 | 1.00 | 0.045 | 0.035 | 23.0 | 5.00 | 28.00 | 2.00 |
*Your information is safe with us.
| Minimum Order Quantity | 5 Kilogram |
| Unit Pipe Length | 6 meter, 3 meter, Customized |
| Usage/Application | Industrial |
| Size | 3 inch, 1/2 inch, 2 inch, 3/4 inch, 1 inch |
| Surface Finishing | Finished Polished |
| Material | Stainless Steel |
| Is It Corrosion Resistant | Corrosion Resistant |
| Form | Round, Square, Rectangular, Hydraulic |
| Minimum Order Quantity | 5 Kilogram |
| Size | 3 inch, 1/2 inch, 3/4 inch, 1 inch, 2 inch |
| Unit Pipe Length | 6 meter, Customized, 3 meter |
| Shape | Round |
| Material | Stainless Steel |
| Application | Industrial, Chemical Laboratory |
Type:
Grade of stainless steel capillary pipes tubes:
| Minimum Order Quantity | 5 Kilogram |
| Single Piece Length | 3 meter, 6 meter |
| Material | Stainless Steel |
| Thickness/Diameter | 1-2 inch, 0-1 inch, >4 inch, 3-4 inch, 2-3 inch |
| Shape | Round |
Specifications:
WNR/DIN | EN Standard | SAE Grade | UNS |
1.4310 | X10CrNi18-8 | 301 | S30100 |
1.4318 | X2CrNiN18-7 | 301LN | N/A |
1.4301 | X5CrNi18-10 | 304 | S30400 |
1.4948 | X6CrNi18-11 | 304H | S30409 |
1.4307 | X2CrNi18-9 | 304L | S30403 |
1.4306 | X2CrNi19-11 | 304L | S30403 |
1.4311 | X2CrNiN18-10 | 304LN | S30453 |
1.4303 | X5CrNi18-12 | 305 | S30500 |
| X5CrNi30-9 | 312 |
|
1.4878 | X12CrNiTi18-9 | 321H | S32109 |
1.4401 | X5CrNiMo17-12-2 | 316 | S31600 |
1.4435 | X2CrNiMo18-14-3 | 316L | S31603 |
1.4429 | X2CrNiMoN17-13-3 | 316LN | S31653 |
1.4571 | X6CrNiMoTi17-12-2 | 316Ti | S31635 |
1.4438 | X2CrNiMo18-15-4 | 317L | S31703 |
*Your information is safe with us.
| Minimum Order Quantity | 100 koliogram |
| Material | ASTM A182 |
| Usage/Application | Industrial |
| Shape | Round |
| Type Of Bolts | FORGED CIRCLE |
| Size | All Size available |
| Brand | MBM |
| Country of Origin | Made in India |
| Minimum Order Quantity | 5 Number |
| Application | Oil & Gas Industry, Automobile Industry |
| Shape | Round |
| Material | Stainless Steel |
| Material Grade | SS304 |
Stainless Steel : | ASTM A403 WP 304/ 304L/ 304H/ 316/ 316L/ 317/ 317L/ 321/ 310/ 347/ 904L/ etc. |
Carbon Steel : | ASTM A234 WPB / A420 WPL3/ A420 WPL6/ MSS-SP-75 WPHY 42/46/52/56/60/65/70 etc. |
Alloy Steel : | ASTM A234 WP1/ WP5/ WP9/ WP11/ WP22/ WP91/ etc. |
Others : | Monel, Nickel, Inconel, Hastalloy, Copper, Brass, Bronze, Titanium, Tantalum, Bismuth, Aluminium, High Speed Steel, Zinc, Lead, etc. |
Size : | 1/8" NB TO 24" NB. (Seamless Welded) |
Wall Thickness : | Sch. 5S To Sch. XXS |