EXPLORE MORE CATEGORIES
- Home
- ยป
- Our Products
- »
- Nickel Products
Nickel Products
Pioneers in the industry, we offer special alloys 329h (uns s32900) round bars, smo 254 (uns s31254) round bars, nickel sheets, nickel plates, nickel alloy 201 plates and nickel alloy 825 plates from India.
Special Alloys 329H (UNS S32900) Round Bars
Product Price: Rs 2,000 / KgGet Best Price
Product Brochure
Product Details:
| Material | Special Alloys 329H |
| Shape | Round |
| Type | Round Bars |
| Single Piece Length | 3 meter |
| Size | All size Available |
| Usage/Application | Industrial |
| Finish | Bright |
| Brand | MBM |
329H Stainless steels are high-alloy steels which have high corrosion resistance than other steels owing to the presence of large amounts of chromium in the range of 4 to 30%.
Stainless steels are classified into martensitic, ferritic and austenitic based on their crystalline structure. In addititon, they form another group known as precipitation-hardened steels, which are a combination of martensitic and austenitic steels.
The following datasheet will provide more details about grade 329H stainless steel, which has slightly lower alloy content than grade 2205, and is inexpensive.
Chemical Composition
The following table shows the chemical composition of grade 329H stainless steel.
|
Element |
Content (%) |
|
Iron, Fe |
63 |
|
Chromium, Cr |
28 |
|
Nickel, Ni |
4.5 |
|
Manganese, Mn |
2 |
|
Molybdenum, Mo |
1.5 |
|
Silicon, Si |
1 |
|
Carbon, C |
0.10 |
|
Phosphorous, P |
0.040 |
|
Sulfur, S |
0.030 |
Physical Properties
The physical properties of grade 329H stainless steel are given in the following table.
|
Properties |
Metric |
Imperial |
|
Density |
7.80 g/cm3 |
0.282 lb/in³ |
Mechanical Properties
The mechanical properties of annealed grade 329H stainless steel are displayed in the following table.
|
Properties |
Metric |
Imperial |
|
Tensile strength, ultimate |
725 MPa |
105000 psi |
|
Tensile strength, yield (@0.2%) |
550 MPa |
79800 psi |
|
Charpy impact |
54 J |
39.8 ft-lb |
|
Elastic modulus |
190 – 210 GPa |
27557 – 30458 ksi |
|
Poisson’s ratio |
0.27 – 0.30 |
0.27 – 0.30 |
|
Elongation at break (in 50 mm) |
25% |
25% |
|
Hardness, Brinell |
230 |
230 |
|
Hardness, Knoop (converted from Brinell hardness) |
253 |
253 |
|
Hardness, Rockwell B |
96 |
96 |
|
Hardness, Rockwell C (converted from Brinell hardness) |
20 |
20 |
|
Hardness, Vickers (converted from Brinell hardness) |
242 |
242 |
Get Best QuoteRequest A Callback
SMO 254 (UNS S31254) Round Bars
Product Price: Rs 1,000 / KgGet Best Price
Product Brochure
Product Details:
| Size | 6mm to 250mm |
| Shape | Round |
| Single Piece Length | 3 meter |
| Usage/Application | Industrial |
| Thickness/Diameter | 0-1 inch, 1-2 inch, 2-3 inch |
| Finish | Polished |
Stainless steel grade 254 SMO is a very high end austenitic stainless steel. It is designed with a combination of impact toughness resistance to chloride stress corrosion cracking, and pitting and crevice corrosion with strength that is twice that of the stainless steel 300 series.
For certain applications, grade 254 SMO has been reported to be a cost-effective substitute for high nickel and titanium alloys. It is known to possess excellent workability as well.
The following sections will discuss in detail about stainless steel grade 254 SMO
Chemical Composition
The chemical composition of stainless steel grade 254 SMO is outlined in the following table.
|
Element |
Content (%) |
|
Iron, Fe |
55.69 |
|
Chromium, Cr |
20 |
|
Nickel, Ni |
18 |
|
Molybdenum, Mo |
6.1 |
|
Nitrogen, N |
0.20 |
|
Carbon, C |
0.010 |
Physical Properties
The physical properties of stainless steel grade 254 SMO are tabulated below.
|
Properties |
Metric |
Imperial |
|
Density |
8 g/cm |
0.289 lb/in |
Mechanical Properties
The following table shows mechanical properties of stainless steel grade 254 SMO
|
Properties |
Metric |
Imperial |
|
Tensile strength |
680 MPa |
98600 psi |
|
Yield strength |
300 MPa |
43500 psi |
|
Modulus of elasticity |
195 GPa |
28300 ksi |
|
Shear modulus |
75 GPa |
10900 ksi |
|
Poisson ratio |
0.30 |
0.30 |
|
Elongation at break |
50 % |
50 % |
|
Hardness, Brinell |
210 |
210 |
Get Best QuoteRequest A Callback
Nickel Sheets
Product Price: Rs 2,000 / KgGet Best Price
Product Details:
| Material | Nickel Sheets |
| Material Grade | Nickel Sheets |
| Usage/Application | Industry |
| Color | Silver |
| Grade | Nickel Sheets |
| Thickness | Customized |
Get Best QuoteRequest A Callback
Nickel Plates
Product Price: Rs 999 / KilogramGet Best Price
Product Details:
| Thickness | 5 mm |
| Elongation | 35% |
| Packing Type | Box |
| Material | Nickel |
| Shape | Rectangular |
Grades | : | Nickel 200 (UNS 2200) / Nickel 201 (UNS N02201) |
Standards | : | ASTM, ASME and API |
Specifications | : | ASTM B162,ASME SB 162 / ASTM B162 ,ASME SB 162 |
Thickness | : | 4 mm to 12 mm Thk. |
Finish | : | Hot rolled plate (HR), Cold rolled sheet (CR), 2B |
|
|
|
Chemical Properties:
Grade | Ni | Fe | C | Mn | Si | Cu | Mg | Ti | S |
Nickel Alloy 200 | 99.0 min | 0.4 max | 0.15 max | 0.035 max. | 0.01 max. | 0.25 max | - | - | 0.01 max |
Nickel Alloy 201 | 99.0 min | 0.4 max | 0.02 max | 0.035 max. | 0.2 max | 0.25 max | 0.15 max | 0.1 max | 0.01 max |
Mechanical Physical Properties:
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , | Psi – 21500 , | 45% |
Get Best QuoteRequest A Callback
Nickel Alloy 201 Plates
Product Price: Rs 2,000 / KilogramGet Best Price
Minimum Order Quantity: 5 Kilogram
Product Brochure
Product Details:
| Thickness | 5 mm |
| Usage/Application | Chemical Industry, Automobile Industry |
| Material | Nickel Alloy |
| Shape | Rectangular |
| Packaging Type | Box |
Nickel Alloy 201
| Common Trade Names | Nickel 201 |
| UNS | N02201 |
| Forms | Fittings |
| Plate | |
| Pipe | |
| Round Bar | |
| Strip | |
| Sheet |
Chemical Composition
| Chemical | % |
| Ni | 99.0 min |
| Fe | .40 max |
| Cu | .25 max |
| C | .02 max |
| Mn | .35 max |
| S | .01 max |
| Si | .35 max |
Applications
- Food processing equipment
- Marine and Offshore Engineering
- Salt Production
- Caustic Handling Equipment
- Manufacture and Handling of Sodium Hydroxide, Particularly at Temperatures Above 300° F
- Reactors and Vessels in Which Fluorine is Generated and Reacted with Hydrocarbons
Mechanical Properties
| Tensile (ksi) | .2% Yield (ksi) | Elongation (%) | Hardness (HRB) |
| 55-80 | 15-40 | 60-40 | 45-75 |
ASTM Specification
| Pipe Smls | Pipe Welded | Tube Smls | Tube Welded | Sheet/Plate | Bar | Fitting |
| B161 | B622 | B161 | B622 | B162 | B160 | B163 |
Get Best QuoteRequest A Callback
Nickel Alloy 825 Plates
Product Price: Rs 1,500 / KilogramGet Best Price
Minimum Order Quantity: 5 Kilogram
Product Brochure
Product Details:
| Surface Finishing | Polished |
| Material Grade | 825 |
| Material | Nickel Alloy |
| Density | 2.7 g/cm3 |
| Packaging Type | Box |
| Common Trade Names | Incoloy 825 |
| UNS | N08825 |
| Forms | Plate Pipe Round Bar Strip Tube |
ASTM Specification
| Pipe Smls | Pipe Welded | Tube Smls | Tube Welded | Sheet/Plate | Bar | Forging | Fitting |
| B423 | B424 | B425 | B564 | B366, B564 |
Chemical Composition
| Element | % |
| Ni | 38.0-46.0 |
| Fe | 22.0 min |
| Cr | 19.5-23.5 |
| Mb | 2.5-3.5 |
| Cu | 1.5-3.0 |
| Ti | .6-1.2 |
| C | 0.05 max |
| Mn | 1.0 max |
| S | 0.03 max |
| Si | 0.5 max |
| Al | 0.2 max |
Mechanical Properties
| Tensile (ksi) | 85 |
| .2% Yield (ksi) | 30-35 |
Get Best QuoteRequest A Callback
Inconel 800 Washer
Product Price: Rs 500 / NumberGet Best Price
Product Brochure
Product Details:
| Size | All |
| Surface Finish | Zinc Plated |
| Material Grade | Inconel 800 |
| Shape | Round |
| Material | Inconel 800 |
| Dimension/Size | 1/4" - 2-1/2" |
| Finish | Plain |
| Standard | : | ASTM / ASME |
| Dimension | : | ASTM, DIN, BS, GB, IS and all International Standards |
| Length | : | M02 to M33 |
| Washer Size | : | 3 mm to 200 mm |
| Materials / Grades | : | Incoloy 800, 800H, 800HT |
| Type | : | Plain Washer, Spring Washer, Tooth Washer, Tapper Washer, Tab Washer, Star Washer etc. |
Get Best QuoteRequest A Callback
Nickel Alloy Tubes
Product Price: Rs 10,000 / KilogramGet Best Price
Minimum Order Quantity: 5 Kilogram
Product Brochure
Product Details:
| Usage/Application | Industrial |
| Unit Length | 6 m |
| Material | Nickel Alloy |
| Shape | Round, Square, Rectangular |
| Diameter | 25 mm |
Specifications:
Alloy | UNS | WNR |
200 | N02200 | 2.406 |
201 | N02201 | 2.4061 |
C22 | N06022 | 1.0402 |
C276 | N10276 | 2.4819 |
400 | N04400 | 2.436 |
600 | 6600 | 2.4816 |
625 | N06625 | 2.4856 |
690 | N06690 | 2.4642 |
825 | N08825 | 2.4858 |
718 | N07718 | 2.4668 |
800 | N08800 | 1.4876 |
800H | N08810 | 1.4876 |
800HT | N08811 | 1.4959 |
Applications:
- Chemical and Petrochemical
- Power Generation
- Biotechnology
- Medical Technology
- Oil and Gas
- Environmental – Waste Treatment, Waste Incineration
- Coal and Gas Processing
- Food Processing
- Fertilizer Production
- Aerospace Parts and Components
Get Best QuoteRequest A Callback
Nickel Alloy 200 Plates
Product Price: Rs 4,000 / KilogramGet Best Price
Minimum Order Quantity: 5 Kilogram
Product Brochure
Product Details:
| Thickness | 5 mm |
| Surface Treatment | Polished |
| Material | Nickel Alloy |
| Elongation | 35% |
| Shape | Rectangular |
Nickel Alloy
| Common Trade Names | Nickel 200 |
| UNS | N02200 |
| Standards | ASTM B-162 |
| ASME SB-162 | |
| Forms | Fittings |
| Plate | |
| Pipe | |
| Round Bar | |
| Strip | |
| Sheet | |
| Tube |
Applications
- Chemical Processing and Electronics
- Containers and Piping
- Processing Equipment
- Particularly to Maintain Product Purity in Handling Foods
- Synthetic Fibers and Alkalies
Chemical Composition
| Composition | % |
| Ni | 99.0 min |
| Fe | .40 max |
| Cu | .25 max |
| C | .15 max |
| Mn | .35 max |
| S | .01 max |
| Si | .35 max |
Mechanical Properties
| Tensile (ksi) | .2% Yield (ksi) | Elongation (%) | Hardness (HRB) |
| 55-80 | 15-40 | 60-40 | 45-75 |
ASTM Specification
| Pipe Smls | Pipe Welded | Tube Smls | Tube Welded | Sheet/Plate | Bar | Fitting |
| B161 | B622 | B161 | B622 | B162 | B160 | B163 |
Get Best QuoteRequest A Callback
Nickel Alloy 617 Plates
Product Price: Rs 10,000 / KilogramGet Best Price
Minimum Order Quantity: 5 Kilogram
Product Brochure
Product Details:
| Thickness | 5 mm |
| Usage/Application | Chemical Industry, Automobile Industry |
| Material | Nickel |
| Elongation | 40% |
| Shape | Rectangular |
| Common Trade Name | Inconel 617 |
| UNS | N06617 |
| Forms | Plates, Wire, Pipe |
ASTM Specification
| Pipe Smls | Pipe Welded | Tube Smls | Tube Welded | Sheet/Plate | Bar | Forging | Fitting | Wire |
| B167 | B517 | B167 | - | B168 | B166 | B564 | B366 | B166 |
Application
- Chemical Processing
- Aerospace
- Heat Treating Industry
- Power Generation
- Heat Treating Muffles and Retorts
- Radiant Tubes
- Catalyst Support Grids in Nitric Acid production
- Steam Super Heater tube supports
Chemical Composition
| Element | % |
| Ni | 61.5 |
| Cr | 22.5 |
| Al | 1.4 |
| Cr | 0.05 |
| Mn | 0.3 |
| Si | 0.2 |
| Fe | 14 |
Mechanical Properties
| Tensile (psi) | .2% Yield (psi) | Elongation (%) |
| 80,000 | 30,000 | 40 |
Get Best QuoteRequest A Callback
Nimonic Steel Components
Product Price: Rs 6,000 / KgGet Best Price
Product Brochure
Product Details:
| Unit Length | 1-6 Mtr |
| Size | 1-100 |
| Material | Nimonic Alloy |
| Shape | Nimonic Alloy |
| Material Grade | Nimonic Alloy |
| Standard | Nimonic Alloy |
| Brand | Nimonic Alloy |
Get Best QuoteRequest A Callback
Nickel Alloy 718 Plates
Product Price: Rs 4,500 / KilogramGet Best Price
Minimum Order Quantity: 5 Kilogram
Product Details:
| Thickness | 5 mm |
| Shape | Round, Square, Rectangular |
| Surface Treatment | Polished |
| Melting Point | 1350 deg C |
| Elongation | 45% |
| Tensile Strength | 930 Mpa |
| Density | 8.2 g/cm3 |
| Material | Nickel Alloy |
| Yield Strength | 482 Mpa |
| Size | 15"NB TO 150"NB |
| Lenght | Within 13500mm |
| Type | Seamless, ERW, Welded |
- Inconel 718 (UNS No. N07718)
Standards:
- ASTM, ASME and API
Specifications:
- ASTM B 704, 705 / ASME SB 704, 705
Get Best QuoteRequest A Callback
Inconel 718 (UNS N07718) Coil Strips
Product Price: Rs 5,000 / KgGet Best Price
Minimum Order Quantity: 1 Kg
Product Details:
| Type | Strip |
| Material Grade | Inconel 718 |
| Usage/Application | Chemical Handling |
| Shape | Coil Form |
| Size | As per requirements. |
| Brand | Inconel 718 |
Get Best QuoteRequest A Callback
Nickel Alloy Plates
Product Price: Rs 10,000 / KilogramGet Best Price
Product Brochure
Product Details:
| Thickness | 5 mm |
| Usage/Application | Chemical Industry, Automobile Industry |
| Material | Nickel |
| Shape | Rectangular |
Grades | : | Nickel 200 (UNS 2200) / Nickel 201 (UNS N02201) |
Standards | : | ASTM, ASME and API |
Specifications | : | ASTM B162,ASME SB 162 / ASTM B162 ,ASME SB 162 |
Thickness | : | 4 mm to 12 mm |
Finish | : | Hot rolled plate (HR), Cold rolled sheet (CR), 2B |
|
|
|
Chemical Properties:
Grade | Ni | Fe | C | Mn | Si | Cu | Mg | Ti | S |
Nickel Alloy 200 | 99.0 min | 0.4 max | 0.15 max | 0.035 max. | 0.01 max. | 0.25 max | - | - | 0.01 max |
Nickel Alloy 201 | 99.0 min | 0.4 max | 0.02 max | 0.035 max. | 0.2 max | 0.25 max | 0.15 max | 0.1 max | 0.01 max |
Mechanical Physical Properties:
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45% |
Get Best QuoteRequest A Callback
Nickel Alloy 600 Plates
Product Price: Rs 5,000 / KilogramGet Best Price
Minimum Order Quantity: 5 Kilogram
Product Details:
| Thickness | 5 mm |
| Grade | Nickel Alloy 600 |
| I Deal In | New Only |
| Usage/Application | Industrial |
| Weight | Upto 10 kg |
| Shape | Rectangular |
| Material | Nickel Alloy |
| Surface Finish | Polished |
| Inconel 600 | Nickel Alloy 600 Plates |
| Common Trade Names | Inconel 600 |
| UNS | N06600 |
| Forms | Fittings |
| Plate | |
| Pipe | |
| Round Bar | |
| Strip | |
| Sheet | |
| Tube | |
| Wire |
ASTM Specification
| Pipe Smls | Pipe Welded | Tube Smls | Tube Welded | Sheet/Plate | Bar | Forging | Fitting | Wire |
| B167 | B517 | B163 | B516 | B168 | B166 | B564 | B366 |
Chemical Composition
| Chemical | % |
| Ni Co | 72.0 min |
| Cr | 14.0-17.0 |
| Fe | 6.0-10.0 |
| C | .15 max |
| Mn | 1.00 max |
| S | .015 max |
| Si | .50 max |
| Cu | .50 max |
Mechanical Properties
| Tensile (ksi) | .2% Yield (ksi) | Elongation (%) | Hardness (HRB) |
| 80-105 | 30-50 | 35-55 | 65-85 |
Application
- Chemical Industry
- Aerospace
- Heat Treating Industry
- Pulp and Paper Industry
- Food Processing
- Nuclear Engineering
- Gas Turbine Components
Additional Information:
- Delivery Time: 2 days
Get Best QuoteRequest A Callback
Nickel Alloy 625 Plates
Product Price: Rs 10,000 / KilogramGet Best Price
Minimum Order Quantity: 5 Kilogram
Product Details:
| Usage/Application | Chemical Industry, Automobile Industry |
| Material | Nickel Alloy |
| Elongation | 35% |
| Shape | Rectangular |
| Common Trade Names | Inconel 625 |
| UNS | N06625 |
| Forms | Plate |
| Round Bar | |
| Strip | |
| Sheet | |
| Tube | |
| Wire |
ASTM Specification
| Pipe Smls | Pipe Welded | Tube Smls | Tube Welded | Sheet/Plate | Bar | Forging | Fitting | Wire |
| B444 | B705 | B444 | B704 | B443 | B446 | - | - | - |
Chemical Composition
| Chemical | % |
| Cr | 20.00-30.00 |
| Ni | Remainder |
| Mo | 8.0-10.0 |
| Co Nb | 1.0 max |
| Ta | 3.15-4.15 |
| Al | .40 max |
| Ti | .40 max |
| C | .10 max |
| Fe | 5.0 max |
| Mn | .50 max |
| Si | .50 max |
| P | .015 max |
| S | .015 max |
Application
- Aircraft Ducting Systems
- Aerospace
- Jet Engine Exhaust Systems
- Engine Thrust-Reverser Systems
- Specialized Seawater Equipment
- Chemical Process Equipment
Get Best QuoteRequest A Callback
Nickel Alloy 400 Plates
Product Price: Rs 2,000 / KilogramGet Best Price
Minimum Order Quantity: 5 Kilogram
Product Details:
| Usage/Application | Chemical Industry, Automobile Industry |
| Material | Nickel Alloy |
| Shape | Rectangular |
| Packaging Type | Box |
| Common Trade Names | Monel 400 |
| UNS | N04400 |
| Forms | Fittings |
| Plate | |
| Pipe | |
| Round Bar | |
| Strip | |
| Sheet | |
| Tube | |
| Wire |
ASTM Specification
| Pipe Smls | Pipe Welded | Tube Smls | Tube Welded | Sheet/Plate | Bar | Forging | Fitting | Wire |
| B165 | B725 | B163 | B127 | B164 | B564 | B366 |
Application
- Marine Engineering
- Chemical and Hydrocarbon Processing Equipment
- Gasoline and Freshwater Tanks
- Crude Petroleum Stills
- De-aerating Heaters
- Boiler Feed Water Heaters and Other Heat Exchangers
- Valves, Pumps, Shafts, Fittings, and Fasteners
- Industrial Heat Exchangers
- Chlorinated Solvents
- Crude oil Distillation Towers
Chemical Composition
| Chemical | % |
| C | .30 max |
| Mn | 2.00 max |
| S | .024 max |
| Si | .50 max |
| Ni | 63.0 min |
| Cu | 28.0-34.0 |
| Fe | 2.50 max |
Mechanical Properties
| Tensile (ksi) | .2% Yield (ksi) | Elongation (%) | Hardness (HRB) |
| 70-85 | 28-50 | 50-35 | 60-76 |
Get Best QuoteRequest A Callback
Nickel Alloy Rod
Product Price: Rs 1,999 / KilogramGet Best Price
Product Details:
| Usage/Application | Manufacturing |
| Single Piece Length | 6 meter, 3 meter |
| Material | Nickel Alloy |
| Size/Diameter | 3 inch, 4 inch, 1/2 inch, 1 inch, 2 inch, >4 inch |
Grades | : | Nickel 200 (UNS 2200) / Nickel 201 (UNS N02201) |
Standards | : | ASTM, ASME and API |
Specifications | : | ASTM B 160,ASME SB 160 |
Size | : | 15NB to 150NB In |
Length | : | 100 mm To 3000 mm Long Above. |
Form | : | Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), |
Finish | : | Bright, Polish Black |
Chemical Properties:
Grade | Ni | Fe | C | Mn | Si | Cu | Mg | Ti | S |
Nickel Alloy 200 | 99.0 min | 0.4 max | 0.15 max | 0.035 max. | 0.01 max. | 0.25 max | - | 0.01 max |
Mechanical Physical Properties:
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45% |
Get Best QuoteRequest A Callback
Nickel Alloy 601 Plates
Product Price: Rs 10,000 / KilogramGet Best Price
Minimum Order Quantity: 5 Kilogram
Product Details:
| Material Grade | 601 |
| Surface Treatment | Polished |
| Material | Nickel Alloy |
| Shape | Rectangular |
| Common Trade Names | Inconel® 601 |
| UNS | N06601 |
| Forms | Plate |
| Pipe | |
| Strip | |
| Sheet | |
| Tube |
ASTM Specification
| Pipe Smls | Pipe Welded | Tube Smls | Tube Welded | Sheet/Plate | Bar | Forging | Fitting | Wire |
| B167 | B517 | B167 | - | B168 | B166 | B564 | B366 | B166 |
Application
- Chemical Processing
- Aerospace
- Heat Treating Industry
- Power Generation
- Heat Treating Muffles and Retorts
- Radiant Tubes
- Catalyst Support Grids in Nitric acid Production
- Steam Superheater Tube Supports
Chemical Composition
| Element | % |
| Ni | 61.5 |
| Cr | 22.5 |
| Al | 1.4 |
| Cr | 0.05 |
| Mn | 0.3 |
| Si | 0.2 |
| Fe | 14 |
Mechanical Properties
| Tensile (psi) | .2% Yield (psi) | Elongation (%) |
| 80,000 | 30,000 | 35 |
Get Best QuoteRequest A Callback
Nickel Alloy 22 Plates
Product Price: Rs 10,000 / KilogramGet Best Price
Minimum Order Quantity: 5 Kilogram
Product Details:
| Usage/Application | Chemical Industry, Automobile Industry |
| Material | Nickel Alloy |
| Elongation | 45% |
| Shape | Rectangular |
| Common Trade Names | Hastelloy C- 22 |
| Inconel 22 | |
| UNS | N06022 |
| Standards | ASTM B-575 |
| ASME SB-575 | |
| Forms | Fittings |
| Plate | |
| Pipe | |
| Round Bar | |
| Sheet | |
| Tube |
Chemical Composition
| Chemical | % |
| Nickel | Balance* |
| Chromium | 20.0-22.5 |
| Molybdenum | 12.5-14.5 |
| Iron | 2.0-6.0 |
| Tungsten | 2.5-3.5 |
| Cobalt | 2.5 max |
| Vanadium | 0.35 max |
| Carbon | 0.015 max |
| Manganese | 0.50 max. |
| Sulfur | 0.02 max |
| Silicon | 0.08 max. |
| Phosphorus | 0.02 max. |
Applications
- Chemical Processing
- Pollution Control
- fuel Gas Desulfurization Systems
- Sour Gas Services
- Waste Incinerators
- Pulp and Paper Processing Industries.
Get Best QuoteRequest A Callback
Nickel Alloy Plate And Sheets
Product Price: Rs 1,300 / KilogramGet Best Price
Product Details:
| Type | Rods, Bars, Pellets |
| Usage/Application | Manufacturing,Construction |
| Surface Treatment | Polished |
| Material | Nickel Alloy |
Nickel has been used in alloys that date back to the dawn of civilization. Chemical analysis of artifacts has shown that weapons, tools, and coins contain nickel in varying amounts.
Nickel in elemental form or alloyed with other metals and materials has made significant contributions to our present-day society and promises to continue to supply materials for an even more demanding future.
Nickel is a versatile element and will alloy with most metals. Complete solid solubility exists between nickel and copper. Wide solubility ranges between iron, chromium, and nickel make possible many alloy combinations.
Applications and Characteristics of Nickel Alloys:Nickel and nickel alloys are used for a wide variety of applications, the majority of which involve corrosion resistance and/or heat resistance. Some of these include:
- Aircraft Gas Turbines
- Steam Turbine Power Plants
- Medical Applications
- Nuclear Power Systems
- Chemical and Petrochemical Industries
A number of other applications for nickel alloys involve the unique physical properties of special-purpose nickel-base or high-nickel alloys. These include:
- Low-Expansion Alloys
- Electrical Resistance Alloys
- Soft Magnetic Alloys
- Shape Memory Alloys
Get Best QuoteRequest A Callback
Nickel Alloy Wire
Product Price: Rs 1,000 / KgGet Best Price
Minimum Order Quantity: 5 Kg
Product Details:
| Usage/Application | Thermal Spray coating |
| Elongation | 40% |
| Material | Stainless Steel |
| Grade | SS304 |
The Nickel alloy wires are widely used as the high resistance alloy for electrical heating and wire-wound resistors in metallurgical industry???chemical industry and electrical industry, etc.
Chemical composition(Standard:GB/T1234-1995):
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Get Best QuoteRequest A Callback
Nickel Wire
Product Price: Rs 1,000 / KgGet Best Price
Minimum Order Quantity: 5 Kg
Product Details:
| Material | Nickel Alloy |
| Pack Type | Roll |
| Usage/Application | Construction |
| Packaging Type | Roll |
| Length | 50 m |
The Nickel wires are widely used as the high resistance alloy for electrical heating and wire-wound resistors in metallurgical industry ??? the chemical industry and electrical industry, etc.
Chemical composition(Standard:GB/T1234-1995):
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Get Best QuoteRequest A Callback
Nickel Alloy 22 Pipes
Product Price: Rs 4,500 / KilogramGet Best Price
Minimum Order Quantity: 5 Kilogram
Product Brochure
Product Details:
| Unit Length | 6 m, 12 m |
| Size | > 4, 2-3, 3-4, 0-1, 1-2 |
| Application | Utilities Water, Drinking Water, Food Products, Gas Handling |
| Shape | Round |
| Material | Nickel Alloy |
| Surface Finish | Polished |
- ASTM B575/ ASME SB575
Applications
- Chemical Processing
- Pollution Control
- Flue Gas Desulfurization Systems
- Sour Gas Services
- Waste Incinerators
- Pulp Papers Processing Industries
Get Best QuoteRequest A Callback
Nickel Alloy 600 Pipes
Product Price: Rs 2,500 / KilogramGet Best Price
Minimum Order Quantity: 5 Kilogram
Product Brochure
Product Details:
| Unit Length | 6 m |
| Size | 1-2, 2-3, 0-1, > 4, 3-4 |
| Application | Medical Gas and Vacuum, Domestic Water Service and Distribution, Air Conditioning |
| Shape | Round |
| Material | Nickel Alloy |
| Common Trade Names | Inconel 600 |
| UNS | N06600 |
| Forms | Fittings |
| Plate | |
| Pipe | |
| Round Bar | |
| Strip | |
| Sheet | |
| Tube | |
| Wire |
ASTM Specification
| Pipe Smls | Pipe Welded | Tube Smls | Tube Welded | Sheet/Plate | Bar | Forging | Fitting | Wire |
| B167 | B517 | B163 | B516 | B168 | B166 | B564 | B366 |
Application
- Chemical Industry
- Aerospace
- Heat Treating Industry
- Pulp and Paper Industry
- Food Processing
- Nuclear Engineering
- Gas Turbine Components
Chemical Composition
| Chemical | % |
| Ni Co | 72.0 min |
| Cr | 14.0-17.0 |
| Fe | 6.0-10.0 |
| C | .15 max |
| Mn | 1.00 max |
| S | .015 max |
| Si | .50 max |
| Cu | .50 max |
Mechanical Properties
| Tensile (ksi) | .2% Yield (ksi) | Elongation (%) | Hardness (HRB) |
| 80-105 | 30-50 | 35-55 | 65-85 |
Get Best QuoteRequest A Callback
Nickel Alloy 400 Pipes
Product Price: Rs 4,500 / KilogramGet Best Price
Minimum Order Quantity: 5 Kilogram
Product Brochure
Product Details:
| Usage/Application | Industrial |
| Unit Length | 6 m |
| Application | Gas Handling |
| Size | 0 to more than 4 kg |
| Shape | Round |
| Material | Nickel Alloy |
| Surface Treatment | Polished |
| Common Trade Names | Monel 400 |
| UNS | N04400 |
| Forms | Fittings |
| Plate | |
| Pipe | |
| Round Bar | |
| Strip | |
| Sheet | |
| Tube | |
| Wire |
ASTM Specification
| Pipe Smls | Pipe Welded | Tube Smls | Tube Welded | Sheet/Plate | Bar | Forging | Fitting | Wire |
| B165 | B725 | B163 | B127 | B164 | B564 | B366 |
Chemical Composition
| Chemical | % |
| C | .30 max |
| Mn | 2.00 max |
| S | .024 max |
| Si | .50 max |
| Ni | 63.0 min |
| Cu | 28.0-34.0 |
| Fe | 2.50 max |
Mechanical Properties
| Tensile (ksi) | .2% Yield (ksi) | Elongation (%) | Hardness (HRB) |
| 70-85 | 28-50 | 50-35 | 60-76 |
Application
- Marine Engineering
- Chemical and Hydrocarbon Processing Equipment
- Gasoline and Freshwater Tanks
- Crude Petroleum Stills
- De-Aerating Heaters
- Boiler Feed Water Heaters and Other Heat Exchangers
- Valves, Pumps, Shafts, Fittings, and Fasteners
- Industrial Heat Exchangers
- Chlorinated Solvents
- Crude Oil Distillation Towers
Get Best QuoteRequest A Callback
Nickel Alloy 718 Pipes
Product Price: Rs 3,500 / KilogramGet Best Price
Product Brochure
Product Details:
| Unit Length | 6 m |
| Size | > 4, 1-2, 2-3, 3-4, 0-1 |
| Application | Utilities Water, Drinking Water, Food Products, Gas Handling |
| Shape | Round |
| Material | Nickel Alloy |
| Common Trade Names | Inconel 718 |
| UNS | N07718 |
| Forms | Plate |
| Round Bar | |
| Strip | |
| Sheet | |
| Tube | |
| Wire |
ASTM Specification
| Sheet/Plate | Bar | Wire |
| B670 | B637 | - |
Application
- Chemical Processing
- Aerospace
- Liquid Fuel Rocket Motor Components
- Pollution-Control Equipment
- Nuclear Reactors
- Cryogenic Storage Tanks
- Valves, Fasteners, Springs, Mandrels, Tubing Hangers
- Well Head Completion Equipment and Blow Out Preventers (BOP)
- Gas Turbine Engine Parts
Chemical Composition
| Chemical | % |
| Ni | 50.00-55.00 |
| Fe | Remainder |
| Cr | 17.00-21.00 |
| Cu | .30 max |
| Mo | 2.80-3.30 |
| Nb | 4.75-5.50 |
| C | .08 max |
| Mn | .35 max |
| P | .015 max |
| S | .015 max |
| Si | .35 max |
| Ti | .65-1.15 |
| Al | .20-.80 |
| Co | 1.00 max |
| B | .006 max |
Mechanical Properties
| Ultimate Tensile Strength, psi | .2% Yield Strength psi | Elongation % | Hardness Rockwell B |
| 1,35,000 | 70,000 | 45 | 100 |
Get Best QuoteRequest A Callback
Nickel Alloy 200 Pipes
Product Price: Rs 4,000 / KilogramGet Best Price
Minimum Order Quantity: 5 Kilogram
Product Brochure
Product Details:
| Unit Length | 6 m, 12 m |
| Size | 1-2, 2-3, 3-4, > 4, 0-1 |
| Application | Air Conditioner, Water Heater, Oil Cooler Pipe, Refrigerator |
| Shape | Round |
| Material | Nickel Alloy |
Nickel Alloy
| Common Trade Names | Nickel 200 |
| UNS | N02200 |
| Standards | ASTM B-162 |
| ASME SB-162 | |
| Forms | Fittings |
| Plate | |
| Pipe | |
| Round Bar | |
| Strip | |
| Sheet | |
| Tube |
ASTM Specification
| Pipe Smls | Pipe Welded | Tube Smls | Tube Welded | Sheet/Plate | Bar | Fitting |
| B161 | B622 | B161 | B622 | B162 | B160 | B163 |
Chemical Composition
| Composition | % |
| Ni | 99.0 min |
| Fe | .40 max |
| Cu | .25 max |
| C | .15 max |
| Mn | .35 max |
| S | .01 max |
| Si | .35 max |
Mechanical Properties
| Tensile (ksi) | .2% Yield (ksi) | Elongation (%) | Hardness (HRB) |
| 55-80 | 15-40 | 60-40 | 45-75 |
Application
- Chemical and Food Industry Loading Plants,
- Electrical and Electronical Parts
- Equipment for Aircraft and Rockets, Tranducers
Get Best QuoteRequest A Callback
Nickel Alloy 825 Pipes
Product Price: Rs 1,800 / KilogramGet Best Price
Product Brochure
Product Details:
| Unit Length | 6 m |
| Size | 1-2, > 4, 3-4, 0-1, 2-3 |
| Application | Utilities Water, Drinking Water, Food Products, Gas Handling |
| Shape | Round |
| Material | Nickel Alloy |
| Surface Treatment | Polished |
| Common Trade Names | Incoloy 825 |
| UNS | N08825 |
| Forms | Plate Pipe Round Bar Strip Tube |
ASTM Specification
| Pipe Smls | Pipe Welded | Tube Smls | Tube Welded | Sheet/Plate | Bar | Forging | Fitting |
| B423 | B424 | B425 | B564 | B366, B564 |
Application
• Sulphuric Acid Piping and Vessels
• Phosphoric Acid Evaporators
• Pickling Tank Heaters, Pickling Tanks, and Equipment
• Chemical Process Equipment
• Propellor Shafts
• Tank Trucks
• Calorifiers
• Electrostatic Precipitator Electrodes
• Hot Vessels for Food, Water, and Seawater,
• ammonium Sulfate Vessels
• Expansion Bellows
• Marine Exhaust Systems
• Power Station Ash HoppersChemical Composition
| Element | % |
| Ni | 38.0-46.0 |
| Fe | 22.0 min |
| Cr | 19.5-23.5 |
| Mb | 2.5-3.5 |
| Cu | 1.5-3.0 |
| Ti | .6-1.2 |
| C | 0.05 max |
| Mn | 1.0 max |
| S | 0.03 max |
| Si | 0.5 max |
| Al | 0.2 max |
Mechanical Properties
| Tensile (ksi) | 85 |
| .2% Yield (ksi) | 30-35 |
Get Best QuoteRequest A Callback
Nickel Alloy Flanges
Product Price: Rs 7,000 / KgGet Best Price
Product Brochure
Product Details:
| Material Standard | ANSI B16.5 |
| Size | >30 inch, 0-1 inch, 1-5 inch, 5-10 inch, 10-20 inch, 20-30 inch |
| Material | Nickel Alloy |
| Shape | Round |
| Surface Treatment | Polished |
| Country of Origin | Made in India |
To cater to the assorted needs of the industries, we provide the Nickel Alloy Flanges in diverse types. Manufactured from the premium raw materials, our Nickel Alloy Flanges are highly efficient. Tested using the latest techniques, our Flanges are free from all kinds of defects. One can obtain flanges from us in small as well as bulk quantities.
Uses:
- Engineering
- Automotive
- Paper
Range:
- 15 NB UP TO 600 NB IN 150 LBS
- 300 LBS, 400 LBS
- 600 LBS
- 900 LBS
- 1500 LBS
- 2500 LBS / TABLE 2.5
- TABLE 6
- TABLE 10
- TABLE 16
- TABLE 25
- TABLE 40
- TABLE 64
- TABLE 160
- TABLE 320
- TABLE 400
Form :
- Slip-On
- Socket Weld
- Blind
- Lapped
- Screwed
- Weld Neck
- Reducing
- Spectacle
- Slip On Boss
- Plate
- Plate Blank
- Screwed Boss
Grades :
- Nickel 200 (UNS No. N02200)
- Nickel 201 (UNS No. N02201)
- Monel 400 (UNS No. N04400)
- Monel 500 (UNS No. N05500)
- Inconel 800 (UNS No. N08800)
- Inconel 825 (UNS No. N08825)
- Inconel 600 (UNS No. N06600)
- Inconel 625 (UNS No. N06625)
- Inconel 601 (UNS No. N06601)
- Hastelloy C 276 (UNS No. N10276)
- Alloy 20 (UNS No. N08020)
- Titanium (Grade I & II)
Get Best QuoteRequest A Callback
Nickel Alloy 201 Pipes
Product Price: Rs 4,500 / KilogramGet Best Price
Minimum Order Quantity: 5 Kilogram
Product Details:
| Usage/Application | Industrial |
| Unit Length | 12 m, 18 m, 6 m |
| Application | Industrial |
| Size | 0-1, 1-2, 2-3, 0-more than 4 kg |
| Shape | Round |
| Material | Nickel Alloy |
| Surface Treatment | Polished |
| Common Trade Names | Nickel 201 |
| UNS | N02201 |
| Forms | Fittings |
| Plate | |
| Pipe | |
| Round Bar | |
| Strip | |
| Sheet |
ASTM Specification
| Pipe Smls | Pipe Welded | Tube Smls | Tube Welded | Sheet/Plate | Bar | Fitting |
| B161 | B622 | B161 | B622 | B162 | B160 | B163 |
Mechanical Properties
| Tensile (ksi) | .2% Yield (ksi) | Elongation (%) | Hardness (HRB) |
| 55-80 | 15-40 | 60-40 | 45-75 |
Applications
- Food Processing Equipment
- Marine and Offshore Engineering
- Salt Production
- Caustic Handling Equipment
- Manufacture and Handling of Sodium Hydroxide, Particularly at Temperatures Above 300° F
- Reactors and Vessels in Which Fluorine is Generated and Reacted with Hydrocarbons
Get Best QuoteRequest A Callback
Nickel Wire
Product Price: Rs 3,000 / KgGet Best Price
Product Details:
| Diameter | Round |
| Product Type | Nickel Wire |
| Type | Nickel Wire |
| Condition | New |
| Size | Customized |
| Country of Origin | Made in India |
Get Best QuoteRequest A Callback
Nickel Alloy 625 Pipes
Product Price: Rs 2,500 / NumberGet Best Price
Product Details:
| Unit Length | 6 m |
| Size | 1-2, 2-3, 3-4, 0-1, > 4 |
| Shape | Round |
| Material | Nickel Alloy |
| Common Trade Names | Inconel 625 |
| UNS | N06625 |
| Forms | Plate |
| Round Bar | |
| Strip | |
| Sheet | |
| Tube | |
| Wire |
ASTM Specification
| Pipe Smls | Pipe Welded | Tube Smls | Tube Welded | Sheet/Plate | Bar | Forging | Fitting | Wire |
| B444 | B705 | B444 | B704 | B443 | B446 | - | - | - |
Chemical Composition
| Chemical | % |
| Cr | 20.00-30.00 |
| Ni | Remainder |
| Mo | 8.0-10.0 |
| Co Nb | 1.0 max |
| Ta | 3.15-4.15 |
| Al | .40 max |
| Ti | .40 max |
| C | .10 max |
| Fe | 5.0 max |
| Mn | .50 max |
| Si | .50 max |
| P | .015 max |
| S | .015 max |
Mechanical Properties
| Yield Strength (0.2% offset) | 40 ksi min |
| Tensile Strength | 100 ksi min |
| Elongation % in 2 inches | 30 |
Application
- Aircraft Ducting Systems
- Aerospace
- Jet Engine Exhaust Systems
- Engine Thrust-Reverser Systems
- Specialized Seawater Equipment
- Chemical Process Equipment
Get Best QuoteRequest A Callback
Nickel Alloy 800HT Pipes
Product Price: Rs 1,200 / KilogramGet Best Price
Product Details:
| Unit Length | 6 m |
| Size | 0-1, 1-2, > 4, 2-3, 3-4 |
| Shape | Round |
| Material | Nickel Alloy |
| Common Trade Names | Incoloy 800HT |
| UNS | N08811 |
| Forms | Strips, Plates Pipes, Tubes |
ASTM Specifications
| Alloy | Pipe Smls | Pipe Welded | Tube Smls | Tube Welded | Sheet/Plate | Bar | Forging | Fitting |
| Alloy 800HT (UNS N08811) | B407 | B154 | B163 | B515 | B409 | B408 | B564 | B366 |
Chemical Composition
| Chemical | % |
| Ni | 30.0-35.0 |
| Fe | 39.5 min |
| Cr | 19.0-23.0 |
| Cu | .75 max |
| Ti | .25-.60 |
| Al | .85-1.20 |
| C | .06-.10 max |
| Mn | 1.5 max |
| S | .015 max |
| Si | 1.0 max |
Applications
- Ethylene furnace Quench Boilers
- Hydrocarbon Cracking
- Valves, Fittings, and Other Components Exposed to Corrosive Attack from 1100-1800° F
- Industrial Furnaces
- Heat-Treating Equipment
- Chemical and Petrochemical Processing
- Super-Heater and Re-Heaters in Power Plants
- Pressure Vessels
- Heat Exchangers
Get Best QuoteRequest A Callback
Nickel Alloy 800H Pipes
Product Price: Rs 1,399 / KilogramGet Best Price
Product Details:
| Unit Length | 6 m |
| Size | 1-2, > 4, 2-3, 3-4, 0-1 |
| Shape | Round |
| Material | Nickel Alloy |
| Common Trade Names | Incoloy 800H |
| UNS | N08810 |
| Forms | Plate |
| Pipe | |
| Round Bar | |
| Strip | |
| Sheet | |
| Tube |
ASTM Specification
| Alloy | Pipe Smls | Pipe Welded | Tube Smls | Tube Welded | Sheet/Plate | Bar | Forging | Fitting |
| Alloy 800H (UNS N08810) | B407 | B154 | B163 | B515 | B409 | B408 | B564 | B366 |
Chemical Composition
| Chemical | % |
| Ni | 30.0-35.0 |
| Fe | 39.5 min |
| Cr | 19.0-23.0 |
| Cu | .75 max |
| Ti | .15-.60 |
| Al | .15-.60 |
| C | .05-.10 max |
| Mn | 1.5 max |
| S | .015 max |
| Si | 1.0 max |
Mechanical Properties
| Tensile (ksi) | .2% Yield (ksi) | Elongation (%) |
| 75-100 | 30-60 | 60-30 |
Application
- Ethylene Furnace Quench Boilers
- Hydrocarbon Cracking
- Valves, Fittings, and Other Components Exposed to Corrosive Attack from 1100-1800° F
- Industrial Furnaces
- Heat-Treating Equipment
- Chemical and Petrochemical Processing
- Super-Heater and Re-Heaters in Power Plants
- Pressure Vessels
- Heat Exchangers
Get Best QuoteRequest A Callback