- Home
- ยป
- Our Products
- »
- Inconel Products
Inconel Products
Inconel 800 Tubes
Minimum Order Quantity: 5 Kg
Material | Inconel |
Usage/Application | Industrial |
Brand | imported |
Standard | ASTM,ASME,AISI |
Single Piece Length | 6 meter, 3 meter |
Size/Diameter | 1 inch, 2 inch, 3 inch, 1/2 inch |
Product Type | Seamless,ERW |
Shape | Round |
Material Grade | Inconel 800 |
Inconel 601 (UNS 6601) Round Bars
Minimum Order Quantity: 5 Kilogram
Material | Inconel 601 |
Material Grade | Inconel 601 |
Shape | Round |
Size | all |
Type | Bar |
Grade | Inconel 601 |
Single Piece Length | 3 meter, 6 meter |
Size/Diameter | 1 inch |
Usage/Application | Manufacturing |
Color | Silver |
Inconel 800 Filler Rod
Minimum Order Quantity: 5 Kilogram
Material | Inconel |
Grade | Inconel 600,625,718,800,825 |
Type | Bar |
Usage/Application | Industrial |
Length | 6 Meter |
Inconel 625 Sheets
Plate Type | Inconel Plate |
Usage/Application | Chemical Processing |
Thickness | 5 mm |
Length | 50 m |
Material Grade | Inconel 625 |
Steel Grade | Inconel 625 |
Shape | Square, Rectangle |
Inconel | Yes |
Material | Inconel |
Inconel 625 Sheets are manufactured from High Quality of Standard Raw Materials and are designed as per with national and international standards. We offer these Inconel Alloy 625 sheets in custom sizes as per the requirements given by our clients, and that too at an affordable and market leading prices.
Type:
Perforated
Hot Rolled (HR)
Cold Rolled (CR)
Chemical Composition:
Grade | Ni | Fe | C | Mn | Si | Cu | Cr | S | Al | |
Inconel | 625 | 58.0 min | 5.0 max | 0.10 max | 0.50 max | 0.50 max | - | 20.0 - 23.0 | 0.015 max | 0.40 max |
Mechanical Properties:
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.4 g/cm3 | 1290-1350??? | 760 min. | 345 min. | 30 % |
Inconel 825 Plates
Plate Type | Inconel Plate |
Grade | 825 |
Material Grade | SS316 |
Steel Grade | Inconel 825 |
Shape | Square, Rectangle |
Inconel | Yes |
Material | Sheet, Rod, Plate |
Grades
UNS N08825
Inconel 825 Sheets
Inconel 825 Plates
Inconel 825 Coils
Chemical Composition
Chemical | % |
Ni | 38-46 |
Cr | 19.5-23.5 |
Fe | Bal. |
C | 0.05 |
Mn | 1.00 |
Si | 0.5 |
Cu | 1.5-3.00 |
Mo | 2.5-3.5 |
Al | 0.2 |
Ti | 0.6-1.2 |
P | 0.03 |
Inconel 825
UNS | Trademark | W.Nr |
N08825 | Inconnel 825 | 2.4858 |
Inconel 800 HT Plates
Grade | 800 |
Plate Type | Inconel Plate |
Material Grade | 800 |
Usage/Application | Chemical |
Steel Grade | 800 |
Shape | Rectangle, Square |
Inconel | Yes |
Grade:
Inconel 800HT Plates
AMS 5871 Sheet, Strip and Plate
BS 3076 Plates
UNS N08811
Inconel 800HT
UNS | Trademark | W.Nr |
UNS N08811 | Inconel 800HT | 1.4959 |
Inconel 625 Sheets And Plates
Minimum Order Quantity: 10 Kilogram
Thickness | 5-10 mm |
Material | Inconel |
Grade | Inconel 625 |
Shape | Rectangle |
Length | 20 m |
Brand | MBM |
ASTM B443 Plates
Inconel 625 Plate
Inconel 625 Sheet
UNS N06625
Chemical Composition
Element | % |
C | .10 max |
Cr | 20.00-30.00 |
Mo | 8.0-10.0 |
Co Nb | 1.0 max |
Ta | 3.15-4.15 |
Al | .40 max |
Ti | .40 max |
Fe | 5.0 max |
Mn | .50 max |
Si | .50 max |
P | .015 max |
S | .015 max |
Ni | Remainder |
ASTM Specifications
Pipe Smls | Pipe Welded | Tube Smls | Tube Welded | Sheet/Plate | Bar |
B444 | B705 | B444 | B704 | B443 | B446 |
Inconel 825 Sheets
Plate Type | Inconel Plate |
Grade | 825 |
Product Type | Sheet, Round Bars, Pipe |
Usage/Application | Aerospace, Chemical |
Density | 2.15 g/cm3 |
Material Grade | 825 |
Steel Grade | Inconel 825 |
Elongation | 35 % |
Shape | Square, Rectangle |
Inconel | Yes |
Material | Inconel |
Inconel 825 Sheets
Inconel 825 Plates
Chemical Composition
Chemical | % |
Cr | 19.5-23.5 |
Fe | Bal |
C | 0.05 |
Mn | 1.00 |
Si | 0.5 |
Cu | 1.5-3.0 |
Mo | 2.5-3.5 |
Al | 0.2 |
Ti | 0.6-1.2 |
P | 0.03 |
Ni | 38-46 |
Mechanical Properties
Tensile Strength (Mpa) | Yield Strength (Mpa) | Elongation 5 % |
550 | 220 | 30 |
Inconel 617 Sheets
Material Grade | Inconel 617 |
Standard Type | ASTM,ASME |
Material | Inconel |
Shape | Round, Rectangle, Square |
Size | 3mm to 50mm THK |
Color | Silver |
Density | 0.302 lb |
Elongation | 58% |
Tensile Strength | 755 MPa |
Melting Point | 1332 C to 1377 C |
Yield Strength | 351 MPa |
Usage/Application | Industrial / Manufacture |
Brand | MBM |
Country of Origin | Made in India |
Inconel Alloy 617 Sheet has some excellent mechanical features at both very high and very low temperatures. Our Inconel 617 Sheets are accessible to our valuable customers in different range of diameters, wall thicknesses and sizes in customized form and also at quite affordable rates.
NCONEL alloy 617 is a nickel chromium cobalt molybdenum alloy, with an addition of Aluminium, which is designed to have a combination of increased strength and stability at elevated temperature, whilst retaining the high temperature corrosion resistance of INCONEL alloy 601. The alloy has been widely employed in gas turbine hot gas paths as combustion cans, ducting and liners.
617 Inconel Plates Chemical Composition :
Grade |
Ni |
Cr |
Fe |
Mo |
Co |
Mn |
Cu |
Al |
Ti |
Si |
C |
S |
P |
MIN |
44.2 |
20.0 |
– |
8.0 |
10.0 |
– |
– |
0.8 |
– |
– |
– |
– |
– |
MAX |
56.0 |
24.0 |
3.0 |
10.0 |
15.0 |
0.5 |
0.5 |
1.5 |
0.6 |
0.5 |
0.15 |
0.015 |
0.015 |
ASTM A168 Inconel 617 Plates Mechanical properties:
Element |
Yield Strength |
Tensile Strength |
Elongation % |
Reduction of Area |
Hardness, BHN |
||
ksi |
MPa |
ksi |
MPa |
||||
Inconel 617 |
50.9 |
351 |
109.5 |
755 |
58 |
Inconel 718 Tube
Material | Inconel |
Usage/Application | Industrial |
Single Piece Length | 3 meter, 6 meter |
Size/Diameter | 2 inch, 1/2 inch |
Shape | Round |
Grade | Inconel 718 |
Availability in
Inconel 718 Tube
Inconel 718 Seamless Tube
Inconel 718 Welded Tube
Chemical Composition
Chemical | % |
Cr | 17.00-21.00 |
Cu | .30 max |
Mo | 2.80-3.30 |
Nb | 4.75-5.50 |
C | .08 max |
Mn | .35 max |
P | .015 max |
| .015 max |
Si | .35 max |
Ti | .65-1.15 |
Al | .20-.80 |
Co | 1.00 max |
B | .006 max |
Ni | 50.00-55.00 |
Fe | Remainder |
ASTM Specification
Sheet/Plate | Bar | Wire |
B670 | B637 | - |
Application Inconel 718
Aerospace
Nuclear reactors
Cryogenic storage tanks
Gas turbine engine parts
Chemical processing
Inconel 600 Plates
Minimum Order Quantity: 5 Kg
Type | Inconel Plate |
Steel Grade | Inconel 600 |
Material Grade | Inconel 600 |
Plate Type | Inconel Plate |
Shape | Rectangle |
Size | 4mm to 50mm |
Thickness Range | 0.3mm - 60mm |
Inconel 600 Plate exhibit many other advantageous properties. Known by its trade name Inconel 600 is also sold under terms such as Nickel 600, Alloy 600, Nickelvac 600 as well as Ferrochronin 60. Apart from being one of the widest used plate across several industries, this nickel chromium based Alloy 600 Plate is usually available in sheet, coil & strips.
Many of our clients prefer using the ASTM B168 UNS N06600 Sheet at cryogenic temperature settings right up to an elevated temperature point of about 2000 °F. This is because, at elevated temperatures, the content of nickel present in the Inconel 600 Sheet is what aids the alloy in retaining its corrosion resistance properties. This corrosion resistance property has been noticed even in the presence of a reductive condition, where the Alloy 600 Sheet has the ability to resist corrosion by a number of organic as well as inorganic compounds. At cryogenic temperatures, unlike certain conventionally used stainless steel grade plates, the ASME SB 168 UNS N06600 Strips does not undergo a ductile to the brittle transition phase. Generally, the very versatile Inconel 600 strip is available in any size or choose from one of our stock sizes up to 3m long.
ASME SB 168 UNS N06600 Sheet Chemical Composition
Alloy | C | Mn | Si | S | Cu | Fe | Ni | Cr |
Grade 600 | 0.15 maximum | 1.00 maximum | 0.50 maximum | 0.015 maximum | 0.50 maximum | 6.00 – 10.00 | 72.00 min | 14.00 – 17.00 |
Alloy 600 Plate Mechanical Properties
Grade | Density | Melting Range | Tensile Stress | Yield Stress (0.2%Offset) | Elongation |
Alloy 600 | 8.47 g/cm3 | 1413 °C (2580 °F) | Psi – 95,000 , MPa – 655 | Psi – 45,000 , MPa – 310 | 40 % |
Inconel 825 Rod
Minimum Order Quantity: 5 Kilogram
Material | Inconel 825 |
Size | 10mm - 210mm |
Shape | Round |
Usage/Application | Industries |
Material Grade | Inconel 825 |
Third Party Inspection Tpi | Available |
Nickel | Yes |
Grades | Inconel 825 |
Incoloy 825 is a nickel-iron-chromium alloy with additions of molybdenum, copper and titanium. This nickel steel alloy’s chemical composition is designed to provide exceptional resistance to many corrosive environments. It is similar to alloy 800 but has improved resistance to aqueous corrosion. It has excellent resistance to both reducing and oxidizing acids, to stress-corrosion cracking, and to localized attack such as pitting and crevice corrosion. Alloy 825 is especially resistant to sulfuric and phosphoric acids. This nickel steel alloy is used for chemical processing, pollution-control equipment, oil and gas well piping, nuclear fuel reprocessing, acid production, and pickling equipment.
Inconel 600 Sheet
Minimum Order Quantity: 5 Kg
Thickness | 2-6 mm |
Material Grade | Inconel 600 |
Thickness (Inches) | 0.5mm - 6mm |
Material | Inconel |
Shape | Rectangle |
Size | 3mm to 50mm THK |
Inconel 600 Plate exhibit many other advantageous properties. Known by its trade name Inconel 600 is also sold under terms such as Nickel 600, Alloy 600, Nickelvac 600 as well as Ferrochronin 60. Apart from being one of the widest used plate across several industries, this nickel chromium based Alloy 600 Plate is usually available in sheet, coil & strips.
Many of our clients prefer using the ASTM B168 UNS N06600 Sheet at cryogenic temperature settings right up to an elevated temperature point of about 2000 °F. This is because, at elevated temperatures, the content of nickel present in the Inconel 600 Sheet is what aids the alloy in retaining its corrosion resistance properties. This corrosion resistance property has been noticed even in the presence of a reductive condition, where the Alloy 600 Sheet has the ability to resist corrosion by a number of organic as well as inorganic compounds. At cryogenic temperatures, unlike certain conventionally used stainless steel grade plates, the ASME SB 168 UNS N06600 Strips does not undergo a ductile to the brittle transition phase. Generally, the very versatile Inconel 600 strip is available in any size or choose from one of our stock sizes up to 3m long.
ASME SB 168 UNS N06600 Sheet Chemical Composition
Alloy | C | Mn | Si | S | Cu | Fe | Ni | Cr |
Grade 600 | 0.15 maximum | 1.00 maximum | 0.50 maximum | 0.015 maximum | 0.50 maximum | 6.00 – 10.00 | 72.00 min | 14.00 – 17.00 |
Alloy 600 Plate Mechanical Properties
Grade | Density | Melting Range | Tensile Stress | Yield Stress (0.2%Offset) | Elongation |
Alloy 600 | 8.47 g/cm3 | 1413 °C (2580 °F) | Psi – 95,000 , MPa – 655 | Psi – 45,000 , MPa – 310 | 40 % |
Inconel 601 Filler Wire
Minimum Order Quantity: 5 Kilogram
Material | Inconel 601 |
Quantity Per Roll | 20 kg |
Wire Material | SS, Inconel 601 |
Density | 8.28 g/cm3 |
Usage | Aerospace |
Wire Gauge | 0.04mm |
Inconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200° F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling. This nickel alloy has good high temperature strength, and retains its ductility after long service exposure. It has good resistance to aqueous corrosion, high mechanical strength, and is readily formed, machined and welded. Inconel 601’s properties make it a material of broad utility in fields like thermal processing, chemical processing, pollution control, aerospace, and power generation. However, alloy 601 is not suggested for use in strongly reducing, sulfur bearing environments.
inconel 625 Sheet
Minimum Order Quantity: 5 Kilogram
Plate Type | Inconel Plate |
Width | 1250 - 1500mm |
Usage/Application | Chemical Processing |
Thickness | 1-50mm |
Material Grade | Inconel 625 |
Shape | Square, Rectangle |
Range | 0.5 mm to 50 mm |
Inconel | Yes |
Material | Inconel 625 |
Inconel 625 is a corrosion and oxidation resistant nickel alloy that is used both for its high strength and outstanding aqueous corrosion resistance. Its outstanding strength and toughness is due to the addition of niobium which acts with the molybdenum to stiffen the alloy’s matrix. Alloy 625 has excellent fatigue strength and stress-corrosion cracking resistance to chloride ions. This nickel alloy has excellent weldability and is frequently used to weld AL-6XN. This alloy resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corrosion. Some typical applications Inconel 625 is used in are chemical processing, aerospace and marine engineering, pollution-control equipment, and nuclear reactors.
Inconel 625 Plates
Minimum Order Quantity: 5 Kilogram
Grade | Inconel 625 |
Material Grade | Inconel 625 |
Plate Type | Inconel Plate |
Thickness | 0.3mm - 60mm |
Steel Grade | Inconel 625 |
Shape | Square, Rectangle |
Inconel | Yes |
Material | SS |
Inconel 625 is a corrosion and oxidation resistant nickel alloy that is used both for its high strength and outstanding aqueous corrosion resistance. Its outstanding strength and toughness is due to the addition of niobium which acts with the molybdenum to stiffen the alloy’s matrix. Alloy 625 has excellent fatigue strength and stress-corrosion cracking resistance to chloride ions. This nickel alloy has excellent weldability and is frequently used to weld AL-6XN. This alloy resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corrosion. Some typical applications Inconel 625 is used in are chemical processing, aerospace and marine engineering, pollution-control equipment, and nuclear reactors.
Inconel 718 Sheets
Minimum Order Quantity: 2 Kilogram
Grade | Inconel 718 |
Plate Type | Inconel Plate |
Material Grade | Inconel 718 |
Usage/Application | Aerospace |
Steel Grade | inconel 718 |
Shape | Rectangle, Square |
Inconel | Yes |
Material | Inconel 718 |
Inconel 718 is a nickel-chromium-molybdenum alloy designed to resist a wide range of severely corrosive environments, pitting and crevice corrosion. This nickel steel alloy also displays exceptionally high yield, tensile, and creep-rupture properties at high temperatures. This nickel alloy is used from cryogenic temperatures up to long term service at 1200° F. One of the distinguishing features of Inconel 718’s composition is the addition of niobium to permit age hardening which allows annealing and welding without spontaneous hardening during heating and cooling. The addition of niobium acts with the molybdenum to stiffen the alloy’s matrix and provide high strength without a strengthening heat treatment. Other popular nickel-chromium alloys are age hardened through the addition of aluminum and titanium. This nickel steel alloy is readily fabricated and may be welded in either the annealed or precipitation (age) hardened condition.
Specifications
Sheet/Plate | Bar | Wire |
---|---|---|
B670 | B637 | - |
Chemical Composition
Chemical | % |
Cr | 17.00-21.00 |
Cu | .30 max |
Mo | 2.80-3.30 |
Nb | 4.75-5.50 |
C | .08 max |
Mn | .35 max |
P | .015 max |
S | .015 max |
Si | .35 max |
Ti | .65-1.15 |
Al | .20-.80 |
Co | 1.00 max |
B | .006 max |
Ni | 50.00-55.00 |
Fe | Remainder |
Mechanical Properties
Ultimate Tensile Strength, psi | .2% Yield Strength psi | Elongation % | Hardness Rockwell B |
---|---|---|---|
135,000 | 70,000 | 45 | 100 |
Inconel 600 Filler Rod
Minimum Order Quantity: 5 Kilogram
Payment Terms | Advance |
Size | 1-5 |
Usage/Application | Manufacturing |
Single Piece Length | 18 meter, 3 meter, 6 meter |
Grade | Inconel 600 |
Material Grade | Inconel 600 |
Material | Inconel 600 |
inconel 800 Rod
Minimum Order Quantity: 5 Kilogram
Usage/Application | Manufacturing |
Single Piece Length | 3 meter, 6 meter |
Third Party Inspection Tpi | Available |
Grade | inconel 800 |
Shape | Round |
Material Grade | Inconel 800 |
Type | Bar |
Material | Inconel |
Inconel 800 are nickel-iron-chromium alloys with good strength and excellent resistance to oxidation and carburization in high-temperature exposure. These nickel steel alloys are identical except for the higher level of carbon in alloy 800H, and the addition of up to 1.20 percent aluminum and titanium in alloy 800HT. Inconel 800 was the first of these alloys and it was slightly modified into Inconel 800H. This modification was to control carbon (.05-.10%) and grain size to optimize stress rupture properties. Inconel 800HT has further modifications to the combined titanium and aluminum levels (.85-1.20%) to ensure optimum high temperature properties. The nickel alloy is dual certified (800H/HT) and combines the properties of both forms. Inconel 800H/HT alloy was intended for high temperature structural applications. The nickel content makes the alloys highly resistant to both chloride stress-corrosion cracking and to embrittlement from precipitation of sigma phase. The general corrosion resistance is excellent. In the solution annealed condition, alloys 800H and 800HT have superior creep and stress rupture properties. Today, most suppliers, including Mega Mex, only carry the dual certified 800H/HT alloy.
Inconel 800 is primarily used in applications with temperatures up to 1100° F, where alloys 800H and 800HT are normally used in temperatures above 1100° F where resistance to creep and rupture is required. The chemical balance allows the nickel steel alloy to exhibit excellent resistance to carburization, oxidation and nitriding atmospheres. Inconel 800HT will not become embrittled even after long periods of usage in the 1200-1600° F range where many stainless steels become brittle. Excellent cold forming characteristics typically associated with the nickel-chromium alloys are exhibited with 800HT. When cold formed extensively the grain size produces a visibly undulated surface called “orange peel”. Inconel 800HT can be welded by the common techniques used on stainless steels.
Inconel 601 Filler Rod
Minimum Order Quantity: 5 Kilogram
Usage/Application | Manufacturing |
Single Piece Length | 6 meter, >36 meter, 3 meter |
Third Party Inspection Tpi | Available |
Grade | Inconel 601 |
Shape | Round |
Diameter | 40-500 mm |
Material | Inconel 601 |
Inconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200° F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling. This nickel alloy has good high temperature strength, and retains its ductility after long service exposure. It has good resistance to aqueous corrosion, high mechanical strength, and is readily formed, machined and welded. Inconel 601’s properties make it a material of broad utility in fields like thermal processing, chemical processing, pollution control, aerospace, and power generation. However, alloy 601 is not suggested for use in strongly reducing, sulfur bearing environments.
Inconel 825 Sheet
Minimum Order Quantity: 5 Kilogram
Plate Type | Inconel Plate |
Thickness (Inches) | 0.05 mm to 3.00 mm |
Usage/Application | Chemical Processing |
Material | Inconel |
Brand | Imported |
Shape | Square, Rectangle |
Inconel | Yes |
Surface Finishing | Depends on Requirement |
Grades | Inconel 825 |
Width | 6 mm to 450 mm |
Incoloy 825 is a nickel-iron-chromium alloy with additions of molybdenum, copper and titanium. This nickel steel alloy’s chemical composition is designed to provide exceptional resistance to many corrosive environments. It is similar to alloy 800 but has improved resistance to aqueous corrosion. It has excellent resistance to both reducing and oxidizing acids, to stress-corrosion cracking, and to localized attack such as pitting and crevice corrosion. Alloy 825 is especially resistant to sulfuric and phosphoric acids. This nickel steel alloy is used for chemical processing, pollution-control equipment, oil and gas well piping, nuclear fuel reprocessing, acid production, and pickling equipment.
Inconel 601 Plates
Plate Type | Inconel Plate |
Usage/Application | Chemical |
Material Grade | Inconel |
Shape | Square, Rectangle |
Ultimate Strength | Yes |
Inconel X-750 Plate
Minimum Order Quantity: 20 Kilogram
Material | Sheet, Plate, Round Bard |
Steel Grade | Inconel x 750 |
Material Grade | Inconel X 750 |
Plate Type | Inconel Plate |
Shape | Square, Rectangle |
Grade | Inconel X 750 |
Inconel | Yes |
Grade:
Inconel X750 Sheets
Inconel X750 Plates
AMS 5542 Sheet, Strip and Plate
UNS N07750
AMS 5598 Sheet, Strip and Plate
UNS N07752
Chemical Composition
Element | % |
Cr | 14-17 |
Fe | 05-09 |
Nb | 0.7-1.2 |
Co | 1.00 |
C | 0.08 |
Mn | 1.00 |
Si | 0.5 |
Cu | 0.5 |
Al | 0.4-1.0 |
Ti | 2.25-2.75 |
Application
- Nuclear reactors
- Gas turbines
- Rocket engines
- Pressure vessels
- Aircraft structures
Inconel X750
UNS | Trademark | W.Nr |
N07750 | Inconel X750 | 2.4669 |
Inconel X-750 Sheets
Material Grade | Inconel X 750 |
Material | Inconel |
Shape | Rectangle |
Grade | Inconel X 750 |
Elongation | 35% |
Grade:
Inconel X750 Sheets
Inconel X750 Plates
AMS 5542 Sheet, Strip and Plate
UNS N07750
AMS 5598 Sheet, Strip and Plate
UNS N07752
Chemical Composition
Element | % |
Cr | 14-17 |
Fe | 05-09 |
Nb | 0.7-1.2 |
Co | 1.00 |
C | 0.08 |
Mn | 1.00 |
Si | 0.5 |
Cu | 0.5 |
Al | 0.4-1.0 |
Ti | 2.25-2.75 |
Application
- Nuclear reactors
- Gas turbines
- Rocket engines
- Pressure vessels
- Aircraft structures
Inconel X750
UNS | Trademark | W.Nr |
N07750 | Inconel X750 | 2.4669 |
Inconel 800 Sheet
Minimum Order Quantity: 5 Kilogram
Thickness | 2 to 5 mm |
Grade | 800 |
Material Grade | Inconel 800 |
Material | Inconel |
Shape | Round, Square, Rectangle |
Length | 3m |
The chemical composition of INCOLOY alloy 800 is given in the following table.
Element | Content (%) |
---|---|
Iron, Fe | ≥39.5 |
Nickel, Ni | 30-35 |
Chromium, Cr | 19-23 |
Manganese, Mn | ≤1.5 |
Others | Remainder |
The following table discusses the physical properties of INCOLOY alloy 800.
Properties | Metric | Imperial |
---|---|---|
Density | 7.94 gm/cm3 | 0.287 lb/in3 |
Inconel Filler Rod
Minimum Order Quantity: 5 Kilogram
Usage/Application | Industrial |
Material | Inconel |
Type | Bar |
Diameter | 5mm |
Single Piece Length | 6 meter |
Shape | Round |
Color | Silver |
inconel 600 filler wire
Minimum Order Quantity: 5 Kilogram
Material | Inconel |
Usage/Application | Industrial |
Thickness | all size available |
Shape | Filler Wire |
I Deal In | New Only |
Country of Origin | Made in India |
Inconel Alloy 600 Wires are available in various types like ASTM B 166 Inconel 600 Wire, ASME SB 166 Inconel 600 Wire Bobbin, Inconel Alloy 600(UNS No. N06600) Wire Coil, Nickel UNS No. N06600 Filler Wire & Nickel UNS No. N06600 Wire.
Inconel Alloy 600 Wires is exceedingly impervious to chloride-particle stress-erosion splitting because of the high nickel content. Age-solidifying medicines are not required, as Inconel® Alloy 600 is solidified and fortified through cool work as it were. Inconel Alloy 600 Wires can work from cryogenic temperatures to 700°F (370°C).
Inconel Alloy 600 Wires is a Nickel-Chromium-Iron composite with great erosion resistance, oxidation resistance, and high quality at high temperatures. It has good ductility and low work hardening rate and it has good weldability and solderability.
Chemical Composition Of Inconel Alloy 600 (UNS N06600) Wire
C |
MN |
P |
S |
Si |
Cr |
Ni |
Mo |
Cu |
Co |
Cb+Ta |
Ti |
Al |
Fe |
.15 max |
1.0 max |
- |
.015 max |
.5 max |
14.0 - 17.0 |
Nimonic 901 (UNS N09901) Round Bars
Single Piece Length | 3 meter |
Size | 30-40 mm |
Shape | Round |
Usage/Application | Industrial |
Grade | Nimonic 901 |
Diameter | round |
Super alloys are also known as high performance alloys. They contain many elements in a variety of combinations so as to achieve the desired result. These alloys can function in environments with very high temperatures and severe mechanical stress, and also where high surface stability is required. They have good creep and oxidation resistance.
Strengthening of super alloys is performed by solid-solution hardening, work hardening, and precipitation hardening methods.
Nimonic 901 is a nickel-chromium-molybdenum alloy that is precipitation hardened using heat treatment. This alloy is preferred for use in oxidizing environments with temperatures of about 593°C (1100°F).
The following datasheet will provide more details about Nimonic 901
Chemical Composition
The following table shows the chemical composition of Nimonic 901
Element |
Content (%) |
Nickel, Ni |
40-45 |
Iron, Fe |
33 |
Chromium, Cr |
11-14 |
Molybdenum, Mo |
5.0 - 6.50 |
Titanium, Ti |
2.80-3.10 |
Cobalt, Co |
1 |
Manganese, Mn |
0.50 |
Copper, Cu |
0.50 |
Silicon, Si |
0.40 |
Aluminum, Al |
0.35 |
Carbon, C |
0.10 |
Sulfur, S |
0.030 |
Physical Properties
The physical properties of Nimonic 901 are outlined in the following table.
Properties |
Metric |
Imperial |
Density |
8.14 g/cm3 |
0.294 lb/in3 |
Melting point |
1280-1345°C |
2340-2453°F |
Mechanical Properties
The mechanical properties of Nimonic 901 are provided below.
Properties |
Metric |
Imperial |
Tensile strength (precipitation hardened, value at room temperature) |
1200 MPa |
174000 psi |
Yield strength (@strain 0.200%, precipitation hardened, value at room temperature) |
875 MPa |
127000 psi |
Elongation at break (precipitation hardened) |
15% |
15% |
(1100°F).
Additional Information
Item Code | AlloyNimonic901UNSS09901 |
Delivery Time | 5 Days |
Production Capacity | 100 TONS |
Packaging Details | As Per Requested |
inconel round bar
Minimum Order Quantity: 5 Kilogram
Material | Inconel |
Type | Bar |
Single Piece Length | 6 meter |
Usage/Application | Industrial |
inconel 718 filler wire
Minimum Order Quantity: 5 Kilogram
Length | 1000 Mtr |
Density | 8.28 g/cm3 |
Type | Rolling Wire |
Material | Steel |
Inconel Super Alloy 925 (UNS N09925) Round Bars
Shape | Round |
Material | Inconel Super Alloy 925 |
Material Grade | Inconel Super Alloy 925 |
Size | 5mm to 500mm |
Type | Bar |
Standard | ASTM A615 |
Single Piece Length | 3 meter |
Condition | New |
Third Party Inspection Tpi | Available |
Inconel Plates
Grade | 600,800,718,625 |
Plate Type | Inconel Plate |
Usage/Application | Aerospace |
Material Grade | Inconel 600, 800, 825, 718 |
Steel Grade | Inconel 600,800 |
Shape | Square, Rectangle, Round |
Inconel | Yes |
Material | Sheet,Plate, Round Bar |
Grades:
INCONEL ALLOY 600, 601, 625
INCOLOY ALLOY 800, 800H/800HT
Type: Hot Rolled (HR) and Cold Rolled (CR)
Chemical Composition:
Grade | Ni | Fe | C | Mn | Si | Cu | Cr | S | Al | |
Inconel Alloys | 600 | 72.0 min | 6.0 - 10.0 | 0.15 max | 1.00 max | 0.50 max | 0.50 max | 14.0 - 17.0 | 0.015 max | - |
601 | 61.5 min | 14 | 0.05 max | 1.0 max | 0.50 max | 1.0 max | 21.0 - 25.0 | 0.015 max | 1.0 – 1.7 | |
625 | 58.0 min | 5.0 max | 0.10 max | 0.50 max | 0.50 max | - | 20.0 - 23.0 | 0.015 max | 0.40 |
Grade | Ni | Fe | Cr | Cu | Ti | Al | C | Mn | S | Si | |
Incoloy Alloys | 800 | 30.0-35.0 | 39.5 min | 19.0-23.0 | .75 max | .15-.60 | .15-.60 | .1 max | 1.5 max | .015 max | 1.0 max |
800H | 30.0-35.0 | 39.5 min | 19.0-23.0 | .75 max | .15-.60 | .15-.60 | .05-.10 max | 1.5 max | .015 max | 1.0 max | |
800HT | 30.0-35.0 | 39.5 min | 19.0-23.0 | .75 max | .25-.60 | .85-1.20 | .06-.10 max | 1.5 max | .015 max | 1.0 max |
Inconel Sheets
Plate Type | Inconel Plate |
Usage/Application | Chemical Aerspace |
Material Grade | 800,600,601 |
Shape | Square, Rectangle |
Inconel | Yes |
Material | inconel |
Grades:
INCONEL ALLOY 600, 601, 625
INCOLOY ALLOY 800, 800H/800HT
Type: Hot Rolled /Cold Rolled
Chemical Composition:
Grade | Ni | Fe | C | Mn | Si | Cu | Cr | S | Al | |
Inconel Alloys | 600 | 72.0 min | 6.0 - 10.0 | 0.15 max | 1.00 max | 0.50 max | 0.50 max | 14.0 - 17.0 | 0.015 max | - |
601 | 61.5 min | 14 | 0.05 max | 1.0 max | 0.50 max | 1.0 max | 21.0 - 25.0 | 0.015 max | 1.0 – 1.7 | |
625 | 58.0 min | 5.0 max | 0.10 max | 0.50 max | 0.50 max | - | 20.0 - 23.0 | 0.015 max | 0.40 max |
Grade | Ni | Fe | Cr | Cu | Ti | Al | C | Mn | S | Si | |
Incoloy Alloys | 800 | 30.0-35.0 | 39.5 min | 19.0-23.0 | .75 max | .15-.60 | .15-.60 | .1 max | 1.5 max | .015 max | 1.0 max |
800H | 30.0-35.0 | 39.5 min | 19.0-23.0 | .75 max | .15-.60 | .15-.60 | .05-.10 max | 1.5 max | .015 max | 1.0 max | |
800HT | 30.0-35.0 | 39.5 min | 19.0-23.0 | .75 max | .25-.60 | .85-1.20 | .06-.10 max | 1.5 max | .015 max | 1.0 max |
Inconel Plates
Minimum Order Quantity: 1 Kg
Form | Plates,Circle,Disc,Flat |
Steel Grade | 600,601,800,825,718,X750 |
Shape | Plates,Circle,Disc,Flat |
Material Grade | 600,601,800,825,718,X750 |
Plate Type | Inconel Plate, Nickel Plate |
Thickness | 0.5mm to 20mm |
Is It ISO Certified | Non Certified |
Length | As Per Client |
Standard | ASTM |
Inconel Alloy Plates, where it's extensively demanded amongst the clients because of its various uses. In addition, we offer these products in various grades like Inconel 600 Plates, Inconel 601 Plates, Inconel 625 Plates, Inconel 800 Plates, Incoloy 800H Plates, Incoloy 800HT Plates, Incoloy 825 Plates, Incoloy 925 Plates, Inconel 718 Plates.
These Inconel Plates are also being provided in various shapes and sizes to our clients, where our whole product range is used in diverse industrial sectors. Normally, the corrosion resistance of Inconel Welded Plates is extremely good in reducing environments, but bad in climatic conditions. Inconel Plates isn't helpful in oxidizing acids, such as nitric oxide and nitrous. But Inconel Plates is immune to most alkalis, salts, waters, food products, organic substances and atmospheric conditions in normal and elevated temperatures. Inconel EFW Plates has good oxidation resistance in irregular service to 870 Degree C and in constant service to 925 Degree C. Inconel Round Plates can be machined using conventional machining methods that are utilized for iron-based alloys. Inconel Square Plates is comparable to other stainless steel but with a titanium addition of a minimum of five times the carbon material. This addition in Inconel Rectangular Plates reduces or prevents carbide precipitation during welding and at the 800 Degree -- 1500 Degree F support conditions.
ASTM B 167 Inconel Plates Costs
Inconel Plates
Inconel Plates Packaging
Inconel Plates Supplier
Inconel Plates Exporter
These Inconel Platess are also being provided in various shapes and sizes to our clients, where our whole product range is used in diverse industrial sectors. Normally, the corrosion resistance of Inconel Welded Platess is extremely good in reducing environments, but bad in climatic conditions. Inconel Platess isn't helpful in oxidizing acids, such as nitric oxide and nitrous. But Inconel Platess is immune to most alkalis, salts, waters, food products, organic substances and atmospheric conditions in normal and elevated temperatures. Inconel EFW Platess has good oxidation resistance in irregular service to 870 Degree C and in constant service to 925 Degree C. Inconel Round Platess can be machined using conventional machining methods that are utilized for iron-based alloys. Inconel Square Platess is comparable to other stainless steel but with a titanium addition of a minimum of five times the carbon material. This addition in Inconel Rectangular Platess reduces or prevents carbide precipitation during welding and at the 800 Degree -- 1500 Degree F support conditions.
Inconel 600 Plates
Inconel 601 Plates
Inconel 625 Plates
Inconel 718 Plates
Incoloy 800 / 800H / 800HT Plates
Incoloy 825 Plates
Incoloy 925 Plates
Inconel Application
Off-Shore Oil Drilling Companies
Power Generation
Petrochemicals
Gas Processing
Specialty Chemicals
Pharmaceuticals
Pharmaceutical Equipment
Chemical Equipment
Sea Water Equipment
Heat Exchangers
Condensers
Pulp and Paper Industry
Additional Information:
- Production Capacity: 1000
- Delivery Time: 3-5 Days
- Packaging Details: As Per Client Requirement
Inconel 800H/800HT Sheets
Material | Inconel |
Shape | Rectangle |
Finishing | Polished |
Usage/Application | Industrial |
Specification:
ASTM A 240/A 480
ASME SA 240/SA 480
ASTM B 409/B 906
ASME SB 409/SB 906
ASME Code Case 1325
ASME Code Case 2339
BS 3072NA15
BS 3073NA15
SEW 470
VdTÜV 412 434
DIN 17460
EN 10028-7 EN 10095
Grade:
Inconel 800H/ 800HTSheets
Inconel 800H/ 800HT Plates
Inconel 800H/ 800HT Coils
Chemical Composition:
Element | 800H | 800HT |
C | 0 .05 -0 .10 | .10 max |
Cr | 19.0 -23.0 | 19.0 - 23.0 |
Ni | 30.0 - 35.0 | 30.0 - 35.0 |
Ti | 0.15 - 0.60 | 0.15 - 0.60 |
Al | 0.15 - 0.60 | 0.15-0.60 |
Fe | 39.5 min | 39.5 max |
Al Ti | 0.30- 1.20 | 0.30 - 1.20 |
Inconel Sheet
Minimum Order Quantity: 5 Kilogram
Plate Type | Inconel Plate |
Usage/Application | Furnace, Chemical |
Shape | Rectangle |
Material | SS |
Thickness | 0.5mm - 6mm |
Width | 6 mm to 460 mm |
Inconel 800 are nickel-iron-chromium alloys with good strength and excellent resistance to oxidation and carburization in high-temperature exposure. These nickel steel alloys are identical except for the higher level of carbon in alloy 800H, and the addition of up to 1.20 percent aluminum and titanium in alloy 800HT. Inconel 800 was the first of these alloys and it was slightly modified into Inconel 800H. This modification was to control carbon (.05-.10%) and grain size to optimize stress rupture properties. Inconel 800HT has further modifications to the combined titanium and aluminum levels (.85-1.20%) to ensure optimum high temperature properties. The nickel alloy is dual certified (800H/HT) and combines the properties of both forms. Inconel 800H/HT alloy was intended for high temperature structural applications. The nickel content makes the alloys highly resistant to both chloride stress-corrosion cracking and to embrittlement from precipitation of sigma phase. The general corrosion resistance is excellent. In the solution annealed condition, alloys 800H and 800HT have superior creep and stress rupture properties. Today, most suppliers, including Mega Mex, only carry the dual certified 800H/HT alloy.
Inconel 800 is primarily used in applications with temperatures up to 1100° F, where alloys 800H and 800HT are normally used in temperatures above 1100° F where resistance to creep and rupture is required. The chemical balance allows the nickel steel alloy to exhibit excellent resistance to carburization, oxidation and nitriding atmospheres. Inconel 800HT will not become embrittled even after long periods of usage in the 1200-1600° F range where many stainless steels become brittle. Excellent cold forming characteristics typically associated with the nickel-chromium alloys are exhibited with 800HT. When cold formed extensively the grain size produces a visibly undulated surface called “orange peel”. Inconel 800HT can be welded by the common techniques used on stainless steels.
inconel 800 plate
Minimum Order Quantity: 5 Kilogram
Shape | Round |
Material Grade | Inconel 800 |
Plate Type | Inconel Plate |
Condition | New |
Material | Inconel |
inconel plate
Minimum Order Quantity: 5 Kilogram
Plate Type | Nickel Plate |
Shape | Round |
Color | Silver |
Condition | New |
Inconel 800 Sheets
Minimum Order Quantity: 5 Kilogram
Material Grade | SS201 |
Material | SS |
Thickness | 2-5 mm |
Specification
UNS | Trademark | W.Nr | AMS |
UNS N08800 | Inconel 800 | 1.4876 | 5871 |
Chemical Composition
Element | % |
C | 0.10 max |
Cr | 19.0-23.0 |
Ni | 30.0-35.0 |
Ti | 0.15-0.60 |
Al | 0.15-0.60 |
Fe | 39.5 min |
Al Ti | 3.15-4.15 |
Inconel 617 Plates
Minimum Order Quantity: 5 Kilogram
Plate Type | Nickel Plate |
Elongation | 45 % |
Shape | Rectangle |
Inconel 617 Plates
Inconel 617 Sheets
UNS N06617 Plates
Chemical Composition
Elements | Content (%) |
Nickel, Ni | 48.85-62 |
Chromium, Cr | 20-24 |
Cobalt, Co | 10-15 |
Molybdenum, Mo | 08-10 |
Manganese, Mn | ≤ 1 |
Silicon, Si | ≤ 1 |
Carbon, C | ≤ 0.15 |
Mechanical Properties
Properties | Metric | Imperial |
Tensile strength | ≥ 485 MPa | ≥ 70300 psi |
Yield strength | ≥ 275 MPa | ≥ 39900 psi |
Elongation at break | ≥ 25% | ≥ 25% |
Hardness, Brinell | 170 | 170 |
View More