- Home
- ยป
- Our Products
- »
- Monel Products
Monel Products
Monel Round Bars
Shape | Round |
Usage/Application | Construction ,Manufacturing |
Diameter | 3 inch |
Elongation | 40% |
Grade | Monel K 500 |
Material | Monel |
Grades | : | Monel 400 (UNS No. N04400) / Monel K500 (UNS No. N05500) |
Standards | : | ASTM, ASME and API |
Specifications | : | ASTM B 164 / ASME SB 164 |
Size | : | 6 mm to 120 mm. |
Length | : | Random, Fix Cut Length |
Form | : | Square , Round , Hex , Flat, Wire In Black Bright Finish |
Finish | : | Bright, Polish Black |
Standard | Monel 400 | Monel K500 |
WERKSTOFF NR. | 2.4360 | 2.4375 |
UNS | N04400 | N05500 |
Chemical Properties:
Grade | Ni | Fe | C | Mn | Si | Cu | Al | S |
Monel 400 | 63.0 min | 1.0 - 2.5 | 0.3 max | 2.0 max | 0.5 max | 28.0 - 34.0 | 0.50 max | 0.02 max |
Monel K500 | 63.0 min | 05 - 2 | 0.25 max | 1.5 max | 0.5 max | 27.0 - 33.0 | 2.3 - 3.15 | 0.010 max |
Mechanical Properties:
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80,000 , MPa – 550 | Psi – 35,000 , MPa – 240 | 40 % |
8.44 g/cm3 | 1350 °C (2460 °F) | Psi – 1,60,000 , MPa – 1100 | Psi – 1,15,000 , MPa – 790 | 20 % |
Monel 400 Sheets
Usage/Application | Manufacturing, Construction |
Surface Treatment | Polished |
Material Grade | Monel 400 |
Material | Monel |
Length | 50 m |
Alloy 400 is a ductile Nickel-Copper alloy with resistance to a wide variety of corrosive conditions. This alloy is most frequently applied in a range of environments going from mildly oxidizing through neutral and to moderately reducing conditions. Additional application area of this material is in marine environments and other non-oxidizing chloride solutions. Like with commercially pure Nickel, MONEL400 is low in strength in the annealed condition, for this reason a variety of tempers are used to achieve higher strength levels.
Forms:
- Coil – Strip, Foil, Ribbon
- Wire – Profile, Round, Flat, Square
Chemical Composition
- Carbon: 0.30 max
- Nickel Cobalt: 63.0-70.0
- Manganese: 2.0 max
- Silicon: 0.50 max
- Cobalt: 1.00 max
- Iron: 2.5 max
- Sulfur: 0.024 max
- Copper: Balance
Application
- Marine Engineering
- Chemical Equipment
- Hydrocarbon Processing
- Valves
- Pumps fittings
- Fasteners
- Heat Exchangers
- Flexible Metal Hose
Monel K500 (UNS N05500) Round Bars
Brand | MBM |
Shape | Round |
Material Grade | Monel K500 |
Usage/Application | Industrial |
Grade | Monel K500 |
Size | 10 To 300 |
monel k500 round bar is a age hardened nickel based alloy. This nickel based monel uns no5500 triangular bar also contains some amount of element copper added to its alloy. Copper when added to the monel uns 5500 spring steel bar is known to have good resistance to corrosion, similar to that of alloy grade 400.
monel k500 is a precipitation-hardenable nickel-copper alloy that combines the excellent corrosion resistance characteristic of monel 400 with the added advantage of greater strength and hardness. These amplified properties, strength and hardness, are obtained by adding aluminum and titanium to the nickel-copper base and by a thermal processing used to effect precipitation, typically called age hardening or aging. When in the age-hardened condition, monel k-500 has a greater tendency toward stress-corrosion cracking in some environments than monel 400. Alloy k-500 has approximately three times the yield strength and double the tensile strength when compared with alloy 400. Plus, it can be further strengthened by cold working prior to precipitation hardening. The strength of this nickel steel alloy is maintained to 1200 f but stays ductile and tough down to temperatures of 400 f. Its melting range is 2400-2460 f.
monel k500 hollow bar
alloy k500 hollow bar
uns n05500 hollow bar
2. 4375 hollow bar
jis nw 5500 hollow bar
astm b865 monel k500 hollow bar
asme sb865 nickel alloy k500 hollow bar
forged bar
monel k500 forged bar
alloy k500 forged bar
uns n05500 forged bar
2. 4375 forged bar
jis nw 5500 forged bar
astm b865 monel k500 forged bar
asme sb865 nickel alloy k500 forged bar
hex bar
monel k500 hex bar
alloy k500 hex bar
uns n05500 hexagonal bar
2. 4375 hexagonal bar
jis nw 5500 hexagonal bar
astm b865 monel k500 hex bar
asme sb865 nickel alloy k500 hex bar
monel alloy k500 round bar chemical composition
element |
max |
min |
ni |
- |
63. 0 |
fe |
05 - 2 |
- |
c |
0. 25 |
- |
mn |
1. 5 |
- |
si |
0. 5 |
- |
cu |
27. 0 - 33. 0 |
- |
al |
2. 3 - 3. 15 |
- |
s |
0. 010 |
- |
Monel 400 (UNS NO4400) Round Bars
Brand | Villares |
Shape | Round |
Usage/Application | Industrial |
Grade | Monel 400 |
Size | 6 To 300 |
Finishing | Bright |
MONEL is a trademark of Special Metals Corporation under which a series of nickel-copper alloys are grouped. Commercially there are many types of MONEL available, such as alloy 400, alloy 401, alloy R-405, Alloy K-500 and Monel 404.
The Monel 400 alloy is also known as super alloy monel. This alloy is available in some standard shapes such as hexagon, round, tube, pipe, plate, strip, sheet and wire.
The proportions of copper and nickel used to make monel are the same as that found in the nickel ore found in Ontario mines. This alloy exhibits good corrosion resistance. This datasheet will look into the chemical composition, properties and applications of MONEL 400 alloy.
Monel Sheet
Usage/Application | Industrial |
Surface Treatment | Polished |
Technique | Hot Rolled |
Material Grade | SS304 |
Material | Stainless Steel |
Grades | : | Monel 400 (UNS No. N04400) / Monel K500 (UNS No. N05500) |
Standards | : | ASTM, ASME and API |
Specifications | : | ASTM B 127 / ASME SB 127 |
Form | : | Coils, Foils, Rolls, Plain Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc. |
Type | : | Sheet, Plates, Coils, Flat, Strips, Profile, Blank ,Circle, Ring etc. |
Finish | : | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Standard | Monel 400 | Monel K500 |
WERKSTOFF NR. | 2.4360 | 2.4375 |
UNS | N04400 | N05500 |
Chemical Properties:
Grade | Ni | Fe | C | Mn | Si | Cu | Al | S |
Monel 400 | 63.0 min | 1.0 - 2.5 | 0.3 max | 2.0 max | 0.5 max | 28.0 - 34.0 | 0.50 max | 0.02 max |
Monel K500 | 63.0 min | 05 - 2 | 0.25 max | 1.5 max | 0.5 max | 27.0 - 33.0 | 2.3 - 3.15 | 0.010 max |
Mechanical Properties:
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80,000 , MPa – 550 | Psi – 35,000 , MPa – 240 | 40 % |
8.44 g/cm3 | 1350 °C (2460 °F) | Psi – 1,60,000 , MPa – 1100 | Psi – 1,15,000 , MPa – 790 | 20 % |
Monel Plate
Minimum Order Quantity: 5 Kg
Surface Treatment | Polished |
Material | Monel |
Length | 50 m |
Shape | Rectangular |
Grades | : | Monel 400 (UNS No. N04400) / Monel K500 (UNS No. N05500) |
Standards | : | ASTM, ASME and API |
Specifications | : | ASTM B 127 / ASME SB 127 |
Size | : | 15NB to 150NB In |
Form | : | Coils, Foils, Rolls, Plain Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc. |
Type | : | Sheet, Plates, Coils, Flat, Strips, Profile, Blank ,Circle, Ring etc. |
Finish | : | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Standard | Monel 400 | Monel K500 |
WERKSTOFF NR. | 2.4360 | 2.4375 |
UNS | N04400 | N05500 |
Chemical Properties:
Grade | Ni | Fe | C | Mn | Si | Cu | Al | S |
Monel 400 | 63.0 min | 1.0 - 2.5 | 0.3 max | 2.0 max | 0.5 max | 28.0 - 34.0 | 0.50 max | 0.02 max |
Monel K500 | 63.0 min | 05 - 2 | 0.25 max | 1.5 max | 0.5 max | 27.0 - 33.0 | 2.3 - 3.15 | 0.010 max |
Mechanical Properties:
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80,000 , MPa – 550 | Psi – 35,000 , MPa – 240 | 40 % |
8.44 g/cm3 | 1350 °C (2460 °F) | Psi – 1,60,000 , MPa – 1100 | Psi – 1,15,000 , MPa – 790 | 20 % |
Monel Fittings
Minimum Order Quantity: 100 No
Application | Chemical Fertilizer,Pneumatic Connection |
Material | Monel 400, Monel 500 |
Size | 2 inch |
Type | Elbow, Tee, Reducer |
Connection | Male, Female, Flange |
Grades | Monel 400, Monel 500 |
Elbow | Yes |
Product Type | Fittings |
Shape | Elbow, Flanges, Reducer |
Packaging Type | Box |
Monel 400 Pipes
Minimum Order Quantity: 5 Kilogram
Single Piece Length | 6 meter, 3 meter |
Application | Marine Engineering |
Shape | Round |
Material | Monel |
Usage/Application | Chemical Processing Equipment |
Product Type | Pipes |
Grade | Monel 400 |
Density | 8.8 g/cm3 |
Is It Rust Proof | Rust Proof |
Size/Diameter | >4 inch, 1 inch, 2 inch, 3 inch, 1/2 inch, 4 inch |
Monel Pipes
Minimum Order Quantity: 5 Kilogram
Application | Industrial |
Shape | Round |
Material | Monel |
Size/Diameter | 1/2 inch, 1 inch, 2 inch, 3 inch, 4 inch, >4 inch |
Types:
- Seamless Erw Welded Fabricated
Grades as under:
- Monel K-500 (UNS No. N05500)
- Monel 400 (UNS No. N04400)
- Monel R-405 (UNS No. N04405)
Characteristics:
- Resistant to Seawater and Steam at High Temperatures
- Excellent Resistance to Rapidly Flowing Brackish Water or Seawater
- Excellent Resistance to Stress Corrosion Cracking in Most Freshwaters
- Excellent Resistance to Neutral and Alkaline Salt
- Resistance to Chloride-Induced Stress Corrosion Cracking
- High Resistance to Alkalis
Monel Flanges
Minimum Order Quantity: 5 No
Material | Stainless Steel |
Shape | Round |
Material Grade | SS304 |
- Slip-On - SORF
- Weld Neck - WNRF
- Socket Weld - SWRF
- BLIND - BLRF
- Lapped Joint
- Screwed
- Long Weld Neck
- Reducing, Spectacle
- Ring Joint