|Minimum Order Quantity||2 Kilogram|
|Grade||inconel 600,inconel 800. inconel 718,inconel 625|
|Single Piece Length||3 meter, 6 meter|
Inconel is a family of austenitic nickel-chromium-based superalloys.
Inconel alloys are oxidation-corrosion-resistant materials well suited for service in extreme environments subjected to pressure and heat. When heated, Inconel forms a thick, stable, passivating oxide layer protecting the surface from further attack. Inconel retains strength over a wide temperature range, attractive for high-temperature applications where aluminum and steel would succumb to creep as a result of thermally induced crystal vacancies. Inconel''s high-temperature strength is developed by solid solution strengthening or precipitation hardening, depending on the alloy.
Inconel alloys are typically used in high-temperature applications. Common trade names for Inconel Alloy 625 include Inconel 625, In 625, Altemp 625, Haynes 625, Nickelvac 625 and Nicrofer 6020. Inconel Alloy 600 include: NA14, N06600, BS3076, 2.4816, NCr15Fe (FR), NiCr15Fe (EU) and NiCr15Fe8 (DE). Inconel 718 include Nicrofer 5219, Superimphy 718, Haynes 718, Pyromet 718, Supermet 718, and Udimet 718.
The Inconel family of alloys was first developed in the 1940s by research teams at Wiggin Alloys (Hereford, England), which has since been acquired by Special Metals Corporation, in support of the development of the Whittle jet engine.
Inconel alloys are oxidation- and corrosion-resistant materials well suited for service in extreme environments subjected to high pressure and kinetic energy. When heated, Inconel forms a thick and stable passivating oxide layer protecting the surface from further attack. Inconel retains strength over a wide temperature range, attractive for high-temperature applications where aluminum and steel would succumb to creep as a result of thermally induced crystal vacancies (see Arrhenius equation). Inconel''s high-temperature strength is developed by solid solution strengthening or precipitation strengthening, depending on the alloy. In age-hardening or precipitation-strengthening varieties, small amounts of niobiumcombine with nickel to form the intermetallic compound Ni3Nb or gamma double prime (γ″). Gamma prime forms small cubic crystals that inhibit slip and creep effectively at elevated temperatures. The formation of gamma-prime crystals increases over time, especially after three hours of heat exposure of 850 °C, and continues to grow after 72 hours of exposure
Inconel is a difficult metal to shape and machine using traditional cold forming techniques due to rapid work hardening. After the first machining pass, work hardening tends to plastically deform either the workpiece or the tool on subsequent passes. For this reason, age-hardened Inconels such as 718 are machined using an aggressive but slow cut with a hard tool, minimizing the number of passes required. Alternatively, the majority of the machining can be performed with the workpiece in a solutionized form, with only the final steps being performed after age hardening.
External threads are machined using a lathe to "single-point" the threads or by rolling the threads in the solution treated condition (for hardenable alloys) using a screw machine. Inconel 718 can also be roll-threaded after full aging by using induction heat to 1,300 °F (700 °C) without increasing the grain size. Holes with internal threads are made by treadmilling. Internal threads can