Call 08046036687 82% Response Rate

Send Email

Inconel Bars

Leading Wholesale Supplier of inconel filler wire, inconel 718 uns n07718 forging disc, inconel 625 round bars, inconel 601 round bars, inconel 625 rod and inconel 800 round bar from Mumbai.
Inconel Filler Wire

Inconel Filler Wire

Product Price: Rs 1,500 / KilogramGet Best Price

Minimum Order Quantity: 5 Kilogram

Product Details:
Quantity Per Roll20 kg
MaterialSS
Wire MaterialSS
Packaging20-60 kg per pack
Thickness4 mm

Inconel 800 are nickel-iron-chromium alloys with good strength and excellent resistance to oxidation and carburization in high-temperature exposure. These nickel steel alloys are identical except for the higher level of carbon in alloy 800H, and the addition of up to 1.20 percent aluminum and titanium in alloy 800HT. Inconel 800 was the first of these alloys and it was slightly modified into Inconel 800H. This modification was to control carbon (.05-.10%) and grain size to optimize stress rupture properties. Inconel 800HT has further modifications to the combined titanium and aluminum levels (.85-1.20%) to ensure optimum high temperature properties. The nickel alloy is dual certified (800H/HT) and combines the properties of both forms. Inconel 800H/HT alloy was intended for high temperature structural applications. The nickel content makes the alloys highly resistant to both chloride stress-corrosion cracking and to embrittlement from precipitation of sigma phase. The general corrosion resistance is excellent. In the solution annealed condition, alloys 800H and 800HT have superior creep and stress rupture properties. Today, most suppliers, including Mega Mex, only carry the dual certified 800H/HT alloy.
Inconel 800 is primarily used in applications with temperatures up to 1100° F, where alloys 800H and 800HT are normally used in temperatures above 1100° F where resistance to creep and rupture is required. The chemical balance allows the nickel steel alloy to exhibit excellent resistance to carburization, oxidation and nitriding atmospheres. Inconel 800HT will not become embrittled even after long periods of usage in the 1200-1600° F range where many stainless steels become brittle. Excellent cold forming characteristics typically associated with the nickel-chromium alloys are exhibited with 800HT. When cold formed extensively the grain size produces a visibly undulated surface called “orange peel”. Inconel 800HT can be welded by the common techniques used on stainless steels.

Get Best QuoteRequest A Callback
Inconel 718 UNS N07718 Forging Disc

Inconel 718 UNS N07718 Forging Disc

Product Price: Rs 3,550 / kgGet Best Price

Minimum Order Quantity: 100 kg

Product Details:
Usage/ApplicationIndustrial
Single Piece Lengthas per size requirement
SizeAll Size Available
BrandMBM
Material GradeInconel 718
MaterialInconel 718
Surface TreatmentProof Machined

Inconel Alloy 718 is an age hardenable nickel-chromium alloy having high creep-rupture strength at high temperatures to about 1300 Degree F (700 Degree C). The age-hardenable alloy can be readily fabricated into complex parts. Its welding characteristics,especially its resistance to postweld cracking, are outstanding.

 

APPLICATIONS


Nuclear hold down spring and other components
Gas turbine components
Springs
Seal rings

CHEMISTRY TYPICAL


Nickel + Cobalt: 50.00 – 55.00
Chromium: 17.00 – 21.00
Molybdenum: 2.80 – 3.30
Columbium + Tantalum: 4.75 – 5.50
Titanium: 0.65 – 1.15
Aluminum: 0.20 – 0.80
Cobalt: 1.00 max
Carbon: 0.80 max
Manganese: 0.35 max
Silicon: 0.35 max
Phosphorus: 0.015 max
Sulfur: 0.015 max
Boron: 0.006 max
Copper: 0.30 max
Iron: Balance

Get Best QuoteRequest A Callback
inconel 625 Round Bars

inconel 625 Round Bars

Product Price: Rs 2,200 / KilogramGet Best Price

Minimum Order Quantity: 5 Kilogram

Product Details:
MaterialInconel 600
Material GradeInconel 600
Size5mm to 500mm
TypeBar
Unit Length6 m, 3 m
FinishingPolished
ShapeRound
Alloy 625, often referred to as Inconel 625 (where Inconel is a trademark of Special Metals Corp) is a nickel-chromium-molybdenum-niobium alloy (NiCr22Mo9Nb), supplied in the hot worked and annealed condition. Perfectly suited to the most demanding applications, it achieves high-strength levels from the solid solution effects of Molybdenum and Niobium (Colombium) from room temperature up to 800°C.
Get Best QuoteRequest A Callback
inconel 601 Round Bars

inconel 601 Round Bars

Product Price: Rs 2,200 / KilogramGet Best Price

Minimum Order Quantity: 5 Kilogram

Product Details:
MaterialInconel 601
ShapeRound
Material GradeInconel 601
GradeInconel 601
TypeBar
Single Piece Length3 meter, 6 meter
StandardBS4449
Product Description

The alloys nickel base, in concurrence with substantial content of element chromium, provides resistance to the Inconel Alloy 601 Hollow Bar against many corrosive media even in environments, where the temperatures are often elevated. The  Inconel Werkstoff Nr. 2.4851 Round Rod also has good resistance to corrosion against aqueous medium. Other value added properties of the Alloy 601 Inconel Cold Drawn Bar include its high mechanical strength, ease in formability, good machinability and good weldability.

This nickel based alloy produced in the form of rounds, squares, hexagons, rectangles as well as Alloy 601 Uns N06601 Cold Finished Bar apart from cold- worked wire, have been covered in the ASTM B166 specification. This particular specification covers both hot finished and cold worked components such as the Astm B166 Inconel 601 Flat Bar.

The material for 2.4851 Inconel Hexagon Bars is required to conform to the composition limits that have been specified in a reference material. The ASTM B166 specified Alloy 601 Nickel Spring Steel Bar must not only be uniform in quality and condition, but should also be smooth, commercially straight or flat, while being free of injurious imperfections. Mechanical properties of the Alloy Inconel 601 Hot Rolled Bar such as tensile strength, yield strength, elongation, and hardness are to be determined by conducting tests like tension and hardness tests.

We are manufacturers, exporters and inconel 601 round bar suppliers in Mumbai.

 

 

Inconel Alloy 601 Round Bar Chemical Composition.

Grade

C

Mn

Si

Cu

S

Fe

Mo

Ni

Cr

Inconel 601

0.10 max

1 max

0.50 max

1 max

0.15 min

balance

58.0-63.0

21.0–25.0

 

Nickel Alloy 601 Round Bar Mechanical Properties

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

8.1 g/cm3

1411 °C (2571 °F)

 Psi – 80,000 , MPa – 550

Psi – 30,000 , MPa – 205

30 %


Additional Information
Item Code inconel601-round
Delivery Time 03 Days
Production Capacity 300
Packaging Details As Per Request
Get Best QuoteRequest A Callback
inconel 625 Rod

inconel 625 Rod

Product Price: Rs 2,200 / KilogramGet Best Price

Minimum Order Quantity: 5 Kilogram

Product Details:
BrandImported
MaterialIncoenl 625 Round Bar
Material GradeInconel 625
Size5mm to 500mm
GradeInconel 625
TypeBar
Single Piece Length3 meter, 6 meter
ShapeRound
Usage/ApplicationManufacturing
Alloy 625, often referred to as Inconel 625 (where Inconel is a trademark of Special Metals Corp) is a nickel-chromium-molybdenum-niobium alloy (NiCr22Mo9Nb), supplied in the hot worked and annealed condition. Perfectly suited to the most demanding applications, it achieves high-strength levels from the solid solution effects of Molybdenum and Niobium (Colombium) from room temperature up to 800°C.
Get Best QuoteRequest A Callback
Inconel 800 Round Bar

Inconel 800 Round Bar

Product Price: Rs 1,000 / KilogramGet Best Price

Minimum Order Quantity: 5 Kilogram

Product Details:
Usage/ApplicationManufacturing
Single Piece Length3 meter, 6 meter
Third Party Inspection TpiAvailable
Bar TypeNickel Bar
TypeBar
Size30-40 mm
MaterialSS

Inconel 800 are nickel-iron-chromium alloys with good strength and excellent resistance to oxidation and carburization in high-temperature exposure. These nickel steel alloys are identical except for the higher level of carbon in alloy 800H, and the addition of up to 1.20 percent aluminum and titanium in alloy 800HT. Inconel 800 was the first of these alloys and it was slightly modified into Inconel 800H. This modification was to control carbon (.05-.10%) and grain size to optimize stress rupture properties. Inconel 800HT has further modifications to the combined titanium and aluminum levels (.85-1.20%) to ensure optimum high temperature properties. The nickel alloy is dual certified (800H/HT) and combines the properties of both forms. Inconel 800H/HT alloy was intended for high temperature structural applications. The nickel content makes the alloys highly resistant to both chloride stress-corrosion cracking and to embrittlement from precipitation of sigma phase. The general corrosion resistance is excellent. In the solution annealed condition, alloys 800H and 800HT have superior creep and stress rupture properties. Today, most suppliers, including Mega Mex, only carry the dual certified 800H/HT alloy.

Inconel 800 is primarily used in applications with temperatures up to 1100° F, where alloys 800H and 800HT are normally used in temperatures above 1100° F where resistance to creep and rupture is required. The chemical balance allows the nickel steel alloy to exhibit excellent resistance to carburization, oxidation and nitriding atmospheres. Inconel 800HT will not become embrittled even after long periods of usage in the 1200-1600° F range where many stainless steels become brittle. Excellent cold forming characteristics typically associated with the nickel-chromium alloys are exhibited with 800HT. When cold formed extensively the grain size produces a visibly undulated surface called “orange peel”. Inconel 800HT can be welded by the common techniques used on stainless steels.

Get Best QuoteRequest A Callback
Inconel 825 Round Bars

Inconel 825 Round Bars

Product Price: Rs 1,200 / KilogramGet Best Price

Minimum Order Quantity: 5 Kilogram

Product Details:
Usage/ApplicationManufacturing
Single Piece Length36 meter
Unit Length3 m
Third Party Inspection TpiAvailable
StandardASTM A706
ShapeRound
Bar TypeNickel Bar
Material GradeInconel 825
TypeBar
Test CertificateAvailable
NickelYes
BrandImported

Incoloy 825 is a nickel-iron-chromium alloy with additions of molybdenum, copper and titanium. This nickel steel alloy’s chemical composition is designed to provide exceptional resistance to many corrosive environments. It is similar to alloy 800 but has improved resistance to aqueous corrosion. It has excellent resistance to both reducing and oxidizing acids, to stress-corrosion cracking, and to localized attack such as pitting and crevice corrosion. Alloy 825 is especially resistant to sulfuric and phosphoric acids. This nickel steel alloy is used for chemical processing, pollution-control equipment, oil and gas well piping, nuclear fuel reprocessing, acid production, and pickling equipment.

Get Best QuoteRequest A Callback
Inconel 600 Round Bar

Inconel 600 Round Bar

Product Price: Rs 2,200 / KilogramGet Best Price

Minimum Order Quantity: 5 Kilogram

Product Details:
Size20-30 mm
MaterialSS
Unit Length3 m
Single Piece Length3 meter
Usage/ApplicationIndustrial
Test CertificateMill TC or PMI
Third Party Inspection TpiAvailable
Inconel 600 is a nickel-chromium alloy used for applications that require corrosion and high temperature resistance. This nickel alloy was designed for service temperatures from cryogenic to elevated temperatures in the range of 2000° F. It is non-magnetic, has excellent mechanical properties, and presents the desirable combination of high strength and good weldability under a wide range of temperatures. The high nickel content in Inconel 600 enables it to retain considerable resistance under reducing conditions, makes it resistant to corrosion by a number of organic and inorganic compounds, gives it excellent resistance to chloride-ion stress-corrosion cracking and also provides excellent resistance to alkaline solutions. Typical applications of this nickel alloy include the chemical, pulp and paper, aerospace, nuclear engineering and heat treating industries.
Get Best QuoteRequest A Callback
Inconel 617 (UNS N06617) Wire

Inconel 617 (UNS N06617) Wire

Product Price: Rs 3,000 / KgGet Best Price

Product Details:
MaterialInconel
Usage/ApplicationIndustrial
Thicknessall size available
Brandmbm
ShapeFiller Wire
Country of OriginMade in India

The limiting chemical composition of Inconel alloy 617 wires The high nickel and chromium contents make the alloy resistant to a variety of both reducing and oxidizing media. The aluminum, in conjunction with the chromium, provides oxidation resistance at high temperatures. Solid-solution strengthening is imparted by the cobalt and molybdenum.

The combination of high strength and oxidation resistance at temperatures over 1800°F (980°C) makes INCONEL alloy 617 an attractive material for such components as ducting, combustion cans, and transition liners in both aircraft and land-based gas turbines. Because of its resistance to high-temperature corrosion, the alloy is used for catalyst-grid supports in the production of nitric acid, for heat-treating baskets, and for reduction boats in the refining of molybdenum. INCONEL alloy 617 also offers attractive properties for components of power-generating plants, both fossilfueled and nuclear.

 

Mechanical Properties at Room Temperature
Properties: Annealed Typical
Ultimate Tensile Strength: 95 KSI min (655MPa min)
Yield Strength: 35 KSI min (241 MPa min )
Elongation: 30% min

Get Best QuoteRequest A Callback
Inconel 625 (UNS N06625) Wire

Inconel 625 (UNS N06625) Wire

Product Price: Rs 2,500 / KgGet Best Price

Product Details:
MaterialInconel
Usage/ApplicationIndustrial
Thicknessall size available
ShapeFiller Wire
Formcoil
Country of OriginMade in India

Do you know what inconel 625 is? It is an alloy of nickel chromium molybdenum and the wires, rods, bars, sheets, etc made from this alloy has various applications in the industries. There are various manufacturers of Inconel 625 wires but one of the popular manufacturers is Jaiman Metalloys. These alloy wires are fabricated from the high-quality material and it is resistant to a corrosive environment as well as oxidants.

The Inconel 625 wires are designates as ASTM/ SB 446/ ASME B 466 and the size in which these wires are available is 15 NB to 150 NB. It is graded as INCONEL 625 UNS No. N06625. This alloy comes in the form of filler wire, wire bobbin, and coil.

 

Inconel Alloy 625 Wire Chemical Composition

Grade

C

Mn

Si

S

Cu

Fe

Ni

Cr

Inconel 625

0.10 max

0.50 max

0.50 max

0.015 max

5.0 max

58.0 min

20.0 – 23.0

 

Alloy 625 Wire Mechanical Properties

Element

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

Inconel 625

8.4 g/cm3

1350 °C (2460 °F)

Psi – 1,35,000 , MPa – 930

Psi – 75,000 , MPa – 517

42.5 %


Get Best QuoteRequest A Callback
Inconel Round Bar 600

Inconel Round Bar 600

Product Price: Rs 3,000 / KilogramGet Best Price

Product Details:
MaterialSheet,Pipes,Round Bars
ShapeRound
TypeBar, Plate, Sheet
Single Piece Length3 meter, 6 meter
Bar TypeNickel Bar
Grade600,800,825,601
Tensile Strength70 KSI
Payment TermsImmediate Payment
Ultrasonic TestAvailable

Grades:
INCONEL ALLOY 600, 601, 625, 718
INCOLOY ALLOY 800, 800H/800HT

Type:
Forged and Original Round Bar

Chemical Composition:

Grade

Ni

Fe

C

Mn

Si

Cu

Cr

S

Al

Inconel Alloys 

600

72.0 min

6.0 - 10.0

0.15 max

1.00 max

0.50 max

0.50 max

14.0 - 17.0

0.015 max

-

601

61.5 min

14

0.05 max

1.0 max

0.50 max

1.0 max

21.0 - 25.0

0.015 max

1.0 – 1.7

625

58.0 min

5.0 max

0.10 max

0.50 max

0.50 max

-

20.0 - 23.0

0.015 max

0.40 max

718

50 min

55 max

balance

-

0.08 max

-

0.35 max

-

0.35 max

-

0.3 max

17 min

21 max

-

0.01 max

0.2 min

0.8 max

 

Grade

Ni

Fe

Cr

Cu

Ti

Al

C

Mn

S

Si

Incoloy Alloys

800

30.0-35.0

39.5 min

19.0-23.0

.75 max

.15-.60

.15-.60

.1 max

1.5 max

.015 max

1.0 max

800H

30.0-35.0

39.5 min

19.0-23.0

.75 max

.15-.60

.15-.60

.05-.10 max

1.5 max

.015 max

1.0 max

800HT

30.0-35.0

39.5 min

19.0-23.0

.75 max

.25-.60

.85-1.20

.06-.10 max

1.5 max

.015 max

1.0 max

Get Best QuoteRequest A Callback
Inconel 625 (UNS NO6625) Round Bars

Inconel 625 (UNS NO6625) Round Bars

Product Price: Rs 2,200 / KilogramGet Best Price

Minimum Order Quantity: 5 Kilogram

Product Details:
ShapeRound
GradeInconel 625
MaterialIncoenl 625 Round Bar
TypeBar
 Inconel is a nickel-chromium based alloy 625 also known as UNS N06625 or W.Nr. 2.4856. 
Get Best QuoteRequest A Callback
Inconel Alloy X750 (UNS N07750) Round Bar

Inconel Alloy X750 (UNS N07750) Round Bar

Product Price: Rs 3,000 / KgGet Best Price

Product Details:
BrandJindal
ShapeRound
Usage/ApplicationManufacturing
TypeBar
Inconel X-750 round bar is highly resistant to chemical corrosion, oxidation, and stress breaking and has a low creep rate at high stresses at temperatures following appropriate heat treatment
Get Best QuoteRequest A Callback
Inconel 625 Pipe

Inconel 625 Pipe

Product Price: Rs 2,500 / KilogramGet Best Price

Minimum Order Quantity: 5 Kilogram

Product Details:
Material GradeInconel 625
ApplicationChemical Handling
Single Piece Length6 meter
Pipe FluidChemical
ShapeRectangular
ConditionNew
MaterialInconel 625
Usage/ApplicationChemical Processing
GradeInconel 625
Steel GradeInconel 625
WeightDepends on Pipe
Is It Rust ProofRust Proof

Inconel 625 is a corrosion and oxidation resistant nickel alloy that is used both for its high strength and outstanding aqueous corrosion resistance. Its outstanding strength and toughness is due to the addition of niobium which acts with the molybdenum to stiffen the alloy’s matrix. Alloy 625 has excellent fatigue strength and stress-corrosion cracking resistance to chloride ions. This nickel alloy has excellent weldability and is frequently used to weld AL-6XN. This alloy resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corrosion. Some typical applications Inconel 625 is used in are chemical processing, aerospace and marine engineering, pollution-control equipment, and nuclear reactors.

Get Best QuoteRequest A Callback
Inconel 600 Pipe

Inconel 600 Pipe

Product Price: Rs 2,600 / KilogramGet Best Price

Minimum Order Quantity: 5 Kilogram

Product Details:
Material GradeInconel 600
MaterialInconel 600
Single Piece Length6 meter, 3 meter
Pipe FluidChemical
ShapeRound
ConditionNew
Size/Diameter2 inch
Inconel 600 is a nickel-chromium alloy used for applications that require corrosion and high temperature resistance. This nickel alloy was designed for service temperatures from cryogenic to elevated temperatures in the range of 2000° F. It is non-magnetic, has excellent mechanical properties, and presents the desirable combination of high strength and good weldability under a wide range of temperatures. The high nickel content in Inconel 600 enables it to retain considerable resistance under reducing conditions, makes it resistant to corrosion by a number of organic and inorganic compounds, gives it excellent resistance to chloride-ion stress-corrosion cracking and also provides excellent resistance to alkaline solutions. Typical applications of this nickel alloy include the chemical, pulp and paper, aerospace, nuclear engineering and heat treating industries.
Get Best QuoteRequest A Callback
Nimmonic 105 (UNS N1302) Round Bar

Nimmonic 105 (UNS N1302) Round Bar

Product Price: Rs 1,450 / KgGet Best Price

Product Details:
MaterialIron
ShapeRound
Nimonic 105 Round Bar Nimonic 105 (W. Nr. 2.4634) is a wrought nickel-cobalt-chromium-base alloy strengthened by additions of molybdenum, aluminum and titanium.
Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Contact Us
 
Thank youYour Enquiry has been sent successfully.
© M. B. Metal India. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.